# About ACOPOSmulti current

**URL:** <https://community.br-automation.com/t/about-acoposmulti-current/5740>\
**Category:** Mechatronics & Motion\
**Tags:** acopos-multi\
**Created:** [February 6, 2025, 6:14am UTC](https://community.br-automation.com/t/about-acoposmulti-current/5740 "2025-02-06T06:14:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![qinglong.ye](https://avatars.discourse-cdn.com/v4/letter/q/FF8800/32.png) [@qinglong.ye](https://community.br-automation.com/u/qinglong.ye)\
**Post date:** [February 6, 2025, 6:14am UTC](https://community.br-automation.com/t/about-acoposmulti-current/5740/1 "2025-02-06T06:14:54Z")

</div>

Dear，  
I want to get the input and output current values of acoposmulti-8bvp module, which ID number can be read?  
In addition, I found an ID1154: Power stage: Rectifier: Current in AS-help. But when I read it, the values are all 0. How to use it?

---

<div class="post-metadata">

**Author:** ![christoph.hilchenbac](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/christoph.hilchenbac/32/423_2.png) [@christoph.hilchenbac](https://community.br-automation.com/u/christoph.hilchenbac)\
**Post date:** [February 6, 2025, 12:23pm UTC](https://community.br-automation.com/t/about-acoposmulti-current/5740/2 "2025-02-06T12:23:24Z")

</div>

Hi,  
In principle, the 8BVP is similar to 8BVI. In this case, the ‘motor’ is the mains.  
This means that 214 (ICTRL\_ISQ\_ACT) and 219 (ICTRL\_ISD\_ACT) are used here for the input currents.

---

<div class="post-metadata">

**Author:** ![qinglong.ye](https://avatars.discourse-cdn.com/v4/letter/q/FF8800/32.png) [@qinglong.ye](https://community.br-automation.com/u/qinglong.ye)\
**Post date:** [February 7, 2025, 3:03am UTC](https://community.br-automation.com/t/about-acoposmulti-current/5740/3 "2025-02-07T03:03:17Z")

</div>

Hi,  
Thank you for your reply.  
I would like to confirm again whether the ID214 and ID219 is AC380v L1/L2/L3 input to 8BVP or 8BVP input to DCBUS?

---

<div class="post-metadata">

**Author:** ![christoph.hilchenbac](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/christoph.hilchenbac/32/423_2.png) [@christoph.hilchenbac](https://community.br-automation.com/u/christoph.hilchenbac)\
**Post date:** [February 7, 2025, 6:48am UTC](https://community.br-automation.com/t/about-acoposmulti-current/5740/4 "2025-02-07T06:48:35Z")

</div>

Hi,  
yes, they are on primary side. On DC Bus there is no current sensor.
