# Acopos 1045 with a 12 pin X1 front panel connector?

**URL:** <https://community.br-automation.com/t/acopos-1045-with-a-12-pin-x1-front-panel-connector/3206>\
**Category:** Mechatronics & Motion\
**Tags:** acopos\
**Created:** [May 16, 2024, 1:09pm UTC](https://community.br-automation.com/t/acopos-1045-with-a-12-pin-x1-front-panel-connector/3206 "2024-05-16T13:09:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![wobbinc](https://avatars.discourse-cdn.com/v4/letter/w/FF8800/32.png) [@wobbinc](https://community.br-automation.com/u/wobbinc)\
**Post date:** [May 16, 2024, 1:09pm UTC](https://community.br-automation.com/t/acopos-1045-with-a-12-pin-x1-front-panel-connector/3206/1 "2024-05-16T13:09:53Z")

</div>

Hello 🙂

I’m very familiar with the 8V1045 units having a 16 pin X1 front connector, but I’ve recently been asked to test a couple of 8V1045 units which have a 12 pin X1 connector and I can’t find any information anywhere which would give the necessary wiring information. I’ve seen these units on the web described as 8V1045 “Version 1” units - can anyone please point me to where I might obtain some documentation? I know that these are old units (circa 2002?) but they are in really good condition. Thanks in advance.

---

<div class="post-metadata">

**Author:** ![oliver\_D](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/oliver_d/32/257_2.png) [@oliver\_D](https://community.br-automation.com/u/oliver_D)\
**Post date:** [May 16, 2024, 1:16pm UTC](https://community.br-automation.com/t/acopos-1045-with-a-12-pin-x1-front-panel-connector/3206/2 "2024-05-16T13:16:30Z")

</div>

I found (at least) a screenshot of the 12 pin terminal

 ![image](https://europe1.discourse-cdn.com/brcommunity/original/2X/9/9c8075494b3942353a106cda543961a55bb8222f.png)

I will look if I can find an old manual

EDIT: Here it is  
[https://www.br-automation.com/de-at/downloads/antriebstechnik/antriebssysteme/acopos/dokumentation/acopos-anwenderhandbuch-v1/?noredirect=1](https://www.br-automation.com/de-at/downloads/antriebstechnik/antriebssysteme/acopos/dokumentation/acopos-anwenderhandbuch-v1/?noredirect=1)

---

<div class="post-metadata">

**Author:** ![wobbinc](https://avatars.discourse-cdn.com/v4/letter/w/FF8800/32.png) [@wobbinc](https://community.br-automation.com/u/wobbinc)\
**Post date:** [May 16, 2024, 1:43pm UTC](https://community.br-automation.com/t/acopos-1045-with-a-12-pin-x1-front-panel-connector/3206/3 "2024-05-16T13:43:37Z")

</div>

Fabulous! Oliver, you’re a gentleman and a scholar 🙂

Thanks for your assistance, it’s much appreciated.

Kind Regards,  
Robin

---

<div class="post-metadata">

**Author:** ![oliver\_D](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/oliver_d/32/257_2.png) [@oliver\_D](https://community.br-automation.com/u/oliver_D)\
**Post date:** [May 17, 2024, 4:47am UTC](https://community.br-automation.com/t/acopos-1045-with-a-12-pin-x1-front-panel-connector/3206/4 "2024-05-17T04:47:09Z")

</div>

Thank you and you are very welcome here 🙂