# AS6.3.4 mapp motion issue: axis configuration problem **URL:** \ **Category:** Mechatronics & Motion\ **Tags:** mapp-motion\ **Created:** [December 10, 2025, 2:05pm UTC](https://community.br-automation.com/t/as6-3-4-mapp-motion-issue-axis-configuration-problem/9332 "2025-12-10T14:05:00Z")\ **Posts on this page:** 1\ **Showing post:** 11
**Author:** ![michael\_w](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@michael\_w](https://community.br-automation.com/u/michael_w)\ **Post date:** [December 17, 2025, 3:00pm UTC](https://community.br-automation.com/t/as6-3-4-mapp-motion-issue-axis-configuration-problem/9332/11 "2025-12-17T15:00:35Z")
Try opening that in AS - which will fail since it’s not properly exported. Please read > [@How to properly share AS projects](https://community.br-automation.com/t/how-to-properly-share-as-projects/5758/): > > Hi everyone, Often, code and configuration are more expressive than screenshots of an error or general text descriptions of an issue. This is true for various use cases, but of course, given the context, I am doing this with the community in mind. This article is also meant for everyone to link whenever you ask for a shared project in whatever context so you do not have to describe the process yourself. A little data Comparing a new project, a compiled project folder, a zipped project folde… I am wrapping up for this year, merry christmas Michael --- _[View the full topic](https://community.br-automation.com/t/as6-3-4-mapp-motion-issue-axis-configuration-problem/9332)._