# Automation studio closing issue

**URL:** <https://community.br-automation.com/t/automation-studio-closing-issue/11171>\
**Category:** B&R Software & Runtime\
**Tags:** automation-studio\
**Created:** [May 6, 2026, 6:20pm UTC](https://community.br-automation.com/t/automation-studio-closing-issue/11171 "2026-05-06T18:20:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![anwarelgarah](https://avatars.discourse-cdn.com/v4/letter/a/FF8800/32.png) [@anwarelgarah](https://community.br-automation.com/u/anwarelgarah)\
**Post date:** [May 6, 2026, 6:20pm UTC](https://community.br-automation.com/t/automation-studio-closing-issue/11171/1 "2026-05-06T18:20:34Z")

</div>

hello guys,

Did anyone suffer with Automation Studio closing completely by himself?

thank you,

---

<div class="post-metadata">

**Author:** ![valerio.manenti](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/valerio.manenti/32/11712_2.png) [@valerio.manenti](https://community.br-automation.com/u/valerio.manenti)\
**Post date:** [May 6, 2026, 10:17pm UTC](https://community.br-automation.com/t/automation-studio-closing-issue/11171/2 "2026-05-06T22:17:16Z")

</div>

Hi @anwarelgarah ,  
unfortunately I saw that few times.

Ciao  
Valerio

---

<div class="post-metadata">

**Author:** ![Simon\_Stoll](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/simon_stoll/32/445_2.png) [@Simon\_Stoll](https://community.br-automation.com/u/Simon_Stoll)\
**Post date:** [May 7, 2026, 9:09am UTC](https://community.br-automation.com/t/automation-studio-closing-issue/11171/3 "2026-05-07T09:09:39Z")

</div>

Hi Anwar,

yes - we know these problems.

Fortunately, the problems in AS6 have become less frequent.  
However, they still occur quite often—particularly when working in Monitor mode.  
I don’t have any ideas for a solution yet. ☹

Sincerly Simon

---

<div class="post-metadata">

**Author:** ![michael\_w](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@michael\_w](https://community.br-automation.com/u/michael_w)\
**Post date:** [May 7, 2026, 10:18am UTC](https://community.br-automation.com/t/automation-studio-closing-issue/11171/4 "2026-05-07T10:18:38Z")

</div>

Hello,

I don’t think it adds much value if everyone comes in and writes that they also had this issue in the past. This thread makes sense if someone comes up with a solution or, if finding reproduction scenarios, reports them to B&R to fix. Other than that, a collection of “I am/was affected” doesn’t make too much sense?  
Please let me know the intention of this thread and the expected outcome

Best regards

---

<div class="post-metadata">

**Author:** ![valerio.manenti](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/valerio.manenti/32/11712_2.png) [@valerio.manenti](https://community.br-automation.com/u/valerio.manenti)\
**Post date:** [May 7, 2026, 12:42pm UTC](https://community.br-automation.com/t/automation-studio-closing-issue/11171/5 "2026-05-07T12:42:47Z")

</div>

Hi @anwarelgarah ,  
[Using the Diagnostics Reporter dialog](https://help.br-automation.com/#/en/4/diagnostics_support/diagnosis/diagnosticsreporter/diagnostics_reporter_overview.html) you could report the issue to R&D

I’m going to send one right now…

 ![image](https://europe1.discourse-cdn.com/brcommunity/original/2X/b/b0229cf2f9f874ffb60926afdebb778fa891af89.png)

Ciao  
Valerio