# Automation studio v2.01 or v2.38

**URL:** <https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975>\
**Category:** B&R Software & Runtime\
**Tags:** automation-studio\
**Created:** [February 3, 2026, 4:03am UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975 "2026-02-03T04:03:41Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon7194701](https://avatars.discourse-cdn.com/v4/letter/a/FF8800/32.png) [@anon7194701](https://community.br-automation.com/u/anon7194701)\
**Post date:** [February 3, 2026, 4:03am UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/1 "2026-02-03T04:03:41Z")

</div>

Hi Dears

I need Automation Studio v2.01, please help me, I would like to reload a program to cp476

project file name is \* .prj

thank you for attention \_my email is [sharif110@gmail.com](mailto:sharif110@gmail.com)

for example one file contain pc4.prj

PG Version : V 2.38  
GDM-Objektliste : erstellt am 05.10.1998

³ Nr. ³ Taskname ³ RPS ³Prozessor ³Typ ³TC # ³Init-Typ³  
ÃÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄ´  
³ 7 ³ bed\_tab ³ MAIN\_PLC ³ CP\_476 ³ DAT ³ - ³ ³  
³ 8 ³ tv\_mov ³ MAIN\_PLC ³ CP\_476 ³ DAT ³ - ³ ³  
³ 9 ³ a\_mov\_nr ³ MAIN\_PLC ³ CP\_476 ³ DAT ³ - ³ ³  
³ 10 ³ param ³ MAIN\_PLC ³ CP\_476 ³ DAT ³ - ³ ³  
³ 11 ³ z\_param ³ MAIN\_PLC ³ CP\_476 ³ DAT ³ - ³ ³  
³ 12 ³ can\_dat ³ MAIN\_PLC ³ CP\_476 ³ DAT ³ - ³ ³  
³ 13 ³ io\_check ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 22 ³ SRC ³  
³ 14 ³ option\_1 ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 1 ³ SRC ³  
³ 15 ³ waymes ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 1 ³ SRC ³  
³ 16 ³ out\_clr ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 1 ³ ³  
³ 17 ³ hand ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 1 ³ SRC ³  
³ 18 ³ m\_contrl ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 1 ³ ³  
³ 19 ³ m\_ctrl\_1 ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 1 ³ ³  
³ 20 ³ auto ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 1 ³ SRC ³  
³ 21 ³ startpos ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 1 ³ ³  
³ 22 ³ config ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 1 ³ SRC ³  
³ 23 ³ modectrl ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 2 ³ SRC ³  
³ 24 ³ alarm ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 2 ³ SRC ³  
³ 25 ³ times ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 2 ³ ³  
³ 26 ³ t\_out1 ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 2 ³ ³  
³ 27 ³ spc\_esk ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 2 ³ SRC ³  
³ 28 ³ tests ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 3 ³ ³  
³ 29 ³ motor ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 3 ³ ³  
³ 30 ³ regler ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 3 ³ SRC ³  
³ 31 ³ m\_contr2 ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 3 ³ ³  
³ 32 ³ seri\_com ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 3 ³ SRC ³  
³ 33 ³ pmc ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 3 ³ ³  
³ 34 ³ protocol ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 3 ³ SRC ³  
³ 35 ³ mapl\_4pl ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 3 ³ SRC ³  
³ 36 ³ lim\_set ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ SRC ³  
³ 37 ³ bit\_byte ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ SRC ³  
³ 38 ³ calculat ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ SRC ³  
³ 39 ³ cycl\_con ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ ³  
³ 40 ³ clock ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ ³  
³ 41 ³ pid\_opt ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ SRC ³  
³ 42 ³ can\_20a ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ SRC ³  
³ 43 ³ userpage ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ ³  
³ 44 ³ can\_open ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ SRC ³  
³ 45 ³ can\_slav ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ SRC ³  
³ 46 ³ pmc\_plau ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ SRC ³  
³ 47 ³ printer ³ MAIN\_PLC ³ CP\_476 ³ SRC ³ 4 ³ SRC ³

```auto
  n.d : Task nicht in der Datenbank eingetragen

```

---

<div class="post-metadata">

**Author:** ![oliver\_D](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/oliver_d/32/257_2.png) [@oliver\_D](https://community.br-automation.com/u/oliver_D)\
**Post date:** [February 3, 2026, 5:53am UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/2 "2026-02-03T05:53:18Z")

</div>

Hello,

both mentioned versions did not exist.

There was an Automation Studio 2.0 or 2.1 (no 2.01) and 2.38 did never exist

Are you sure that you need Automation Studio and not Automation runtime ? AR 2.01 and also 2.38 would exist

If the project you own has a “.GDM” file then you couls open this with any text editor and it would show the used AS version

From this on we could investigate further which AS and AR you would need

best regards

Oliver

---

<div class="post-metadata">

**Author:** ![christoph.hilchenbac](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/christoph.hilchenbac/32/423_2.png) [@christoph.hilchenbac](https://community.br-automation.com/u/christoph.hilchenbac)\
**Post date:** [February 3, 2026, 9:49am UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/3 "2026-02-03T09:49:14Z")

</div>

> [@anon7194701](#):
>
> PG Version : V 2.38  
> GDM-Objektliste : erstellt am 05.10.1998

You will most likely need PG2000, which is a very old programming system that runs under DOS.

[PG2000 installation (request for sw) - Ask Questions / B&R Software & Runtime - B&R Community](https://community.br-automation.com/t/pg2000-installation-request-for-sw/3704)

---

<div class="post-metadata">

**Author:** ![anon7194701](https://avatars.discourse-cdn.com/v4/letter/a/FF8800/32.png) [@anon7194701](https://community.br-automation.com/u/anon7194701)\
**Post date:** [February 3, 2026, 9:27pm UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/4 "2026-02-03T21:27:26Z")

</div>

Thank you for your reply.

I have got 2 diskettes but not run in dos or win95 &winxp

Is it possible send to us pg2000 program/on my [email:sharif110@gmail.com](mailto:email:sharif110@gmail.com)

best regard-ghassem sharif

---

<div class="post-metadata">

**Author:** ![anon7194701](https://avatars.discourse-cdn.com/v4/letter/a/FF8800/32.png) [@anon7194701](https://community.br-automation.com/u/anon7194701)\
**Post date:** [February 3, 2026, 9:28pm UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/5 "2026-02-03T21:28:47Z")

</div>

Thanks a lot for your fast reply

---

<div class="post-metadata">

**Author:** ![oliver\_D](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/oliver_d/32/257_2.png) [@oliver\_D](https://community.br-automation.com/u/oliver_D)\
**Post date:** [February 4, 2026, 5:51am UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/6 "2026-02-04T05:51:39Z")

</div>

I willl send you a private message containing PG2000

best regards

Oliver

---

<div class="post-metadata">

**Author:** ![anon7194701](https://avatars.discourse-cdn.com/v4/letter/a/FF8800/32.png) [@anon7194701](https://community.br-automation.com/u/anon7194701)\
**Post date:** [February 22, 2026, 11:54pm UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/7 "2026-02-22T23:54:35Z")

</div>

Dear Mr Oliver Doberer

Thank you for your attention and support

At the moment I am using pg2000 ver 2.44

Whit a co476 os v2.27

I would like reprogram plc but I think the os program on plc was damaged and I must be at first reload os on cp476

Is there any file about this matter?

After that this matter run by pg2000 or another program?

 ![20260218_162823](https://europe1.discourse-cdn.com/brcommunity/original/2X/9/9f5eac5aea60ef4c177a36036a5677beaf4be48d.jpeg)

---

<div class="post-metadata">

**Author:** ![oliver\_D](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/oliver_d/32/257_2.png) [@oliver\_D](https://community.br-automation.com/u/oliver_D)\
**Post date:** [February 23, 2026, 6:54am UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/8 "2026-02-23T06:54:34Z")

</div>

Hello @anon7194701

I am sorry to tell but my PG2000 experience is almost 25 years ago and therefor I cannot help here

best regards

Oliver

---

<div class="post-metadata">

**Author:** ![anon7194701](https://avatars.discourse-cdn.com/v4/letter/a/FF8800/32.png) [@anon7194701](https://community.br-automation.com/u/anon7194701)\
**Post date:** [February 23, 2026, 9:15am UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/9 "2026-02-23T09:15:08Z")

</div>

Very well thank you 🙏

---

<div class="post-metadata">

**Author:** ![Themba](https://avatars.discourse-cdn.com/v4/letter/t/FF8800/32.png) [@Themba](https://community.br-automation.com/u/Themba)\
**Post date:** [October 29, 2026, 8:52am UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/10 "2026-10-29T08:52:23Z")

</div>

Good day, I have B&R 2003 legacy plc , may you please send me PG2000 software or old version Automation studio in the following email address

[thembalucasmbatha@gmail.com](mailto:thembalucasmbatha@gmail.com)

[thembalucasmbatha@gmail.com](mailto:thembalucasmbatha@gmail.com)

---

<div class="post-metadata">

**Author:** ![oliver\_D](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/oliver_d/32/257_2.png) [@oliver\_D](https://community.br-automation.com/u/oliver_D)\
**Post date:** [October 29, 2026, 12:17pm UTC](https://community.br-automation.com/t/automation-studio-v2-01-or-v2-38/9975/11 "2026-10-29T12:17:49Z")

</div>

Hello @Themba

I can send you PG2000 but older versions of Automation Studio must not be sent by the community

Please see this post here:

[How to Obtain Older Versions of Automation Studio [AS2 | AS2.7 | AS3.0 | AS4.x] - Share Info & Ideas / How-To & Wikis - B&R Community](https://community.br-automation.com/t/how-to-obtain-older-versions-of-automation-studio-as2-as2-7-as3-0-as4-x/12512)

best regards

Oliver