# Camera has CameraStatus 3

**URL:** <https://community.br-automation.com/t/camera-has-camerastatus-3/13119>\
**Category:** Controls & Vision\
**Tags:** mapp-vision\
**Created:** [October 28, 2026, 5:06pm UTC](https://community.br-automation.com/t/camera-has-camerastatus-3/13119 "2026-10-28T17:06:07Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Frederico\_Mantovani](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/frederico_mantovani/32/7593_2.png) [@Frederico\_Mantovani](https://community.br-automation.com/u/Frederico_Mantovani)\
**Post date:** [October 29, 2026, 12:03pm UTC](https://community.br-automation.com/t/camera-has-camerastatus-3/13119/4 "2026-10-29T12:03:01Z")

</div>

Hi @muehlauer

Thank you very much for the detailed response.

In the meantime, I worked on the **DelayNetTime01** , as I suspected that the lack of a time reference there could be affecting the system.

I solved it last night by performing the calculation described in the Help, taking the POWERLINK timing into account.

Your response confirms that the solution I came up with at the last minute was indeed the correct one.

Once again, thank you for the detailed explanation. **It is this level of community support that gives me confidence in using B&R products.**

Best regards,

---

_[View the full topic](https://community.br-automation.com/t/camera-has-camerastatus-3/13119)._