# Embedding one mappView visualization into another using WebViewer

**URL:** <https://community.br-automation.com/t/embedding-one-mappview-visualization-into-another-using-webviewer/9957>\
**Category:** HMI & Visualization\
**Tags:** mapp-view\
**Created:** [February 2, 2026, 7:11am UTC](https://community.br-automation.com/t/embedding-one-mappview-visualization-into-another-using-webviewer/9957 "2026-02-02T07:11:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Leon\_Rees](https://avatars.discourse-cdn.com/v4/letter/l/FF8800/32.png) [@Leon\_Rees](https://community.br-automation.com/u/Leon_Rees)\
**Post date:** [February 2, 2026, 7:11am UTC](https://community.br-automation.com/t/embedding-one-mappview-visualization-into-another-using-webviewer/9957/1 "2026-02-02T07:11:30Z")

</div>

I have multiple PLC controllers with different visualizations.

Is it possible to embed one visualization into another?

I assume this is not possible by default due to security restrictions.  
Is there any way to change or configure this behavior?

MySetup:

- Automation Studio 4.12.5.95 with mappView 5.24.3
- Using HTTPS protocol
- There are multiple PLCs, each with its own visualization.

---

<div class="post-metadata">

**Author:** ![pavel.vavra](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/pavel.vavra/32/9893_2.png) [@pavel.vavra](https://community.br-automation.com/u/pavel.vavra)\
**Post date:** [February 2, 2026, 7:40am UTC](https://community.br-automation.com/t/embedding-one-mappview-visualization-into-another-using-webviewer/9957/2 "2026-02-02T07:40:19Z")

</div>

Hello and welcome to the Community,

Have you tried it? Have you got errors? Check the following [Community post](https://community.br-automation.com/t/why-webviewer-widget-of-mappview-does-not-show-external-web-page-with-error-refused-to-connect/3669).