Hello, is there a way to read values from the configuration of an axis? Like theses values: [image] I would like to know the next values in the program to use as limits. I got several configuration, running on the same software and i don’t like to change limitations on more than one location.

Hello Martin, thanks for the quick reply. From your answer I found also that I could also use ProcessParam instead. The blocks works but only in real life. First I tested it in ARSim but couldn’t get it work. Can I get it also get it work in ARSim,i prefere a solution that will also work in ARSim. …

Both function blocks, MC_BR_ProcessParam and MC_BR_ProcessConfig, also work on ARsim. What does [image] Rene Jansen: First I tested it in ARSim but couldn’t get it work mean exactly? Did you get an error from the function block? If yes, check the logger, the error entry there states what …

Hello Martin, both blocks won’t work in ARSim for me. [image] I don’t get an error, it’s saying done but I don’t get the values. I will update Mapp Motion from 5.24 tot 5.28 and will test MpAxisBasicConfig, a college found this block and I will give this a try!

I updated everything to the last versions and now it’s solved: [image] :blush:

MpAxisBasicConfig, available from MappMotion 5.27 seems also to work! [image]

Get value from configuration Mapp Motion Axis

Ask Questions Mechatronics & Motion

Martin.Schrott (Martin Schrott) March 11, 2025, 2:51pm 2

Hello Rene,

the parameters can be read with MC_BR_ProcessConfig

These function block inputs are the same for reading and writing

only “Mode” is different.

Topic		Replies	Views
Change in Motor Config in Mapp Motion Mechatronics & Motion motors , automation-studio , mapp-motion	5	280	September 10, 2024
Complete change of axis parameters in AS6.5 Mechatronics & Motion mapp-motion , acp10	23	337	April 7, 2026
ProcessConfig, ProcessParam, Automation Studio, and YOU How-To & Wikis mapp-motion	3	556	May 3, 2024
Read write parameters P3 Mechatronics & Motion acopos-p3 , mapp-motion	4	193	February 27, 2025
Change mappMotion Alarm at runtime Mechatronics & Motion mapp-motion	3	138	September 26, 2025

Get value from configuration Mapp Motion Axis

Related topics