# Hardware of Automation Runtime mismatch between target and project

**URL:** <https://community.br-automation.com/t/hardware-of-automation-runtime-mismatch-between-target-and-project/9041>\
**Category:** B&R Software & Runtime\
**Tags:** apc-ppc, automation-runtime\
**Created:** [November 17, 2025, 2:35pm UTC](https://community.br-automation.com/t/hardware-of-automation-runtime-mismatch-between-target-and-project/9041 "2025-11-17T14:35:44Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![MilanON](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@MilanON](https://community.br-automation.com/u/MilanON)\
**Post date:** [November 17, 2025, 2:35pm UTC](https://community.br-automation.com/t/hardware-of-automation-runtime-mismatch-between-target-and-project/9041/1 "2025-11-17T14:35:44Z")

</div>

Hi Commonity,

I am trying to transfer to my newly connected 5APC2200.AL18-000 but I keep getting the following error when trying to transfer: ‘Project installation not possible due to a hardware or Automation Runtime mismatch between target and project.’. I am trying to solve this issue, but can’t seem to fix it…

Can anyone help me? I have added a screenshot to this post.

Thanks in advance! 🙂

Regards,  
Milan Oude Nijeweme

 ![Schermafbeelding 2025-11-17 152708](https://europe1.discourse-cdn.com/brcommunity/original/2X/1/1fcdd2e06ead9b122704e366919e3dc8249e3dce.png)

---

<div class="post-metadata">

**Author:** ![marcusbnr](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/marcusbnr/32/256_2.png) [@marcusbnr](https://community.br-automation.com/u/marcusbnr)\
**Post date:** [November 17, 2025, 3:21pm UTC](https://community.br-automation.com/t/hardware-of-automation-runtime-mismatch-between-target-and-project/9041/2 "2025-11-17T15:21:07Z")

</div>

Hi Milan,

Which processor is configured in your project’s Physical View? From the lower-right of your screen, you are connected to an APC2200 with processor type AL18. In order to transfer to this target, you must have the same processor configured in your project.

---

<div class="post-metadata">

**Author:** ![kovarj](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/kovarj/32/537_2.png) [@kovarj](https://community.br-automation.com/u/kovarj)\
**Post date:** [December 17, 2025, 2:26pm UTC](https://community.br-automation.com/t/hardware-of-automation-runtime-mismatch-between-target-and-project/9041/3 "2025-12-17T14:26:51Z")

</div>

HI @MilanON have you found usable solution for you, can you update us?

---

<div class="post-metadata">

**Author:** ![MilanON](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@MilanON](https://community.br-automation.com/u/MilanON)\
**Post date:** [December 18, 2025, 7:30am UTC](https://community.br-automation.com/t/hardware-of-automation-runtime-mismatch-between-target-and-project/9041/4 "2025-12-18T07:30:34Z")

</div>

Hi @kovarj,

I haven’t been working on this project since I encountered this problem.

But if I continue the project and find a solution, I will share it in this topic 🙂

---

<div class="post-metadata">

**Author:** ![kovarj](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/kovarj/32/537_2.png) [@kovarj](https://community.br-automation.com/u/kovarj)\
**Post date:** [December 18, 2025, 7:32am UTC](https://community.br-automation.com/t/hardware-of-automation-runtime-mismatch-between-target-and-project/9041/5 "2025-12-18T07:32:53Z")

</div>

Fine, no problem 🙂 I think advice from Marcus is what I should focus on.