# Harware Version to Use with MappSafety Version

**URL:** <https://community.br-automation.com/t/harware-version-to-use-with-mappsafety-version/11132>\
**Category:** B&R Software & Runtime\
**Tags:** mapp-safety\
**Created:** [May 4, 2026, 10:14am UTC](https://community.br-automation.com/t/harware-version-to-use-with-mappsafety-version/11132 "2026-05-04T10:14:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Elian\_Dussart](https://avatars.discourse-cdn.com/v4/letter/e/FF8800/32.png) [@Elian\_Dussart](https://community.br-automation.com/u/Elian_Dussart)\
**Post date:** [May 4, 2026, 10:14am UTC](https://community.br-automation.com/t/harware-version-to-use-with-mappsafety-version/11132/1 "2026-05-04T10:14:23Z")

</div>

Hello,

After reading the “ **Integrated\_Safety\_Technology-ENG\_V6.4.2.pdf** ”, I am not certain of the hardware versions I should use for my components.  
I understand that the versions will be updated automatically, but I would like to know if the version exists or not on my component beforehand, to know if I can still work with it on Safety+.

Here, this screen says that the components need the hardware version 3.0.0.0 minimum.

 ![{F908B72A-15DE-43F0-B666-393CA34BB08E}](https://europe1.discourse-cdn.com/brcommunity/original/2X/3/38dc961150867cfcf80adef9c91cdcd5e3d417cc.png)

When I am looking at CPUs or module, 3.0.0.0 or higher are nowhere to be found :

 ![{892344E9-58B7-4F0A-8983-378E72029B66}](https://europe1.discourse-cdn.com/brcommunity/original/2X/4/4fcf8f0d539b5b7112f5ea3e7308c0b6d260a563.png)

 ![{6CA10C1A-65B6-48A6-BF62-CF49CF742849}](https://europe1.discourse-cdn.com/brcommunity/original/2X/0/058fbe84b0a633cce686990fc981dab62093f3ad.png)

Am I missing something ?

Regards.

---

<div class="post-metadata">

**Author:** ![tommi.piiparinen](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/tommi.piiparinen/32/2183_2.png) [@tommi.piiparinen](https://community.br-automation.com/u/tommi.piiparinen)\
**Post date:** [May 4, 2026, 10:23am UTC](https://community.br-automation.com/t/harware-version-to-use-with-mappsafety-version/11132/2 "2026-05-04T10:23:49Z")

</div>

The versions are relevant only for the Safety modules, your screenshots show standard modules instead of Safety modules.

Here is an example of a Safe Digital Mixed module:

 ![image](https://europe1.discourse-cdn.com/brcommunity/original/2X/7/746e3d9787f7b5c56e65a4b974f16283635a8e87.png)

---

<div class="post-metadata">

**Author:** ![Elian\_Dussart](https://avatars.discourse-cdn.com/v4/letter/e/FF8800/32.png) [@Elian\_Dussart](https://community.br-automation.com/u/Elian_Dussart)\
**Post date:** [May 4, 2026, 10:37am UTC](https://community.br-automation.com/t/harware-version-to-use-with-mappsafety-version/11132/3 "2026-05-04T10:37:39Z")

</div>

Okay indeed,

I wrongfully assumed that I needed to look for every module, as the Product group “X20” was concerned.

Thanks for the response !