# How to Configure Z-Telemetry NT 151-RE-RE for EtherCAT Master and POWERLINK Communication

**URL:** <https://community.br-automation.com/t/how-to-configure-z-telemetry-nt-151-re-re-for-ethercat-master-and-powerlink-communication/12518>\
**Category:** Share Info & Ideas\
**Created:** [September 3, 2026, 2:59pm UTC](https://community.br-automation.com/t/how-to-configure-z-telemetry-nt-151-re-re-for-ethercat-master-and-powerlink-communication/12518 "2026-09-03T14:59:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![halil-ibrahim.turgut](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/halil-ibrahim.turgut/32/15221_2.png) [@halil-ibrahim.turgut](https://community.br-automation.com/u/halil-ibrahim.turgut)\
**Post date:** [September 3, 2026, 2:59pm UTC](https://community.br-automation.com/t/how-to-configure-z-telemetry-nt-151-re-re-for-ethercat-master-and-powerlink-communication/12518/1 "2026-09-03T14:59:25Z")

</div>

Hello everyone,

I would like to share a step by step guide for configuring the Hilscher Z-Telemetry NT 151-RE-RE gateway for communication between an EtherCAT Master and a POWERLINK network.

The guide covers the required device configuration, firmware setup, licensing process, Automation Studio configuration, and integration of external modules using [Sycon.NET](http://Sycon.NET).

I have also included a step by step video showing the device configuration and commissioning process.

 ![şema](https://europe1.discourse-cdn.com/brcommunity/original/2X/e/ec257d3099c02fc14e06b49b396946245ac55ad7.jpeg)

Turkish Document: [Ztelemetry\_EtherCat\_Powerlink\_Setup.pdf](https://community.br-automation.com/uploads/short-url/v0EYpO9EWPmmde4EMArNIFyJ5Av.pdf) (937.9 KB)

English Document: [EtherCAT\_POWERLINK\_ZTelemetry\_EN.pdf](https://community.br-automation.com/uploads/short-url/m7pTZxcJKyxgQLhG1cAHBWdEz7d.pdf) (1.0 MB)

Device configuration video: [https://youtu.be/7IsXPg3WZdo?si=qXaedPDAPW1eYBJY](https://youtu.be/7IsXPg3WZdo?si=qXaedPDAPW1eYBJY)

Useful doucments: [Configuration\_of\_Gateway\_and\_Proxy\_Devices\_OI\_08\_EN.pdf](https://community.br-automation.com/uploads/short-url/4Y61l0PL6zJHBnuDmvT2fYz92ni.pdf) (5.2 MB)

Following these steps, the NT 151 can be configured to exchange data between the EtherCAT Master and POWERLINK network.

I hope this information will be helpful to anyone working with a similar setup.

Best regards,  
Halil İbrahim Turgut

---

<div class="post-metadata">

**Author:** ![kovarj](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/kovarj/32/537_2.png) [@kovarj](https://community.br-automation.com/u/kovarj)\
**Post date:** [September 9, 2026, 8:20am UTC](https://community.br-automation.com/t/how-to-configure-z-telemetry-nt-151-re-re-for-ethercat-master-and-powerlink-communication/12518/2 "2026-09-09T08:20:11Z")

</div>

thanks for sharing, really interesting 😉