# How to find source codes for Kit ETAL310.1c05-1 and ETAL410.1033-1

**URL:** <https://community.br-automation.com/t/how-to-find-source-codes-for-kit-etal310-1c05-1-and-etal410-1033-1/11359>\
**Category:** B&R Software & Runtime\
**Tags:** automation-studio, mapp-motion, vc4\
**Created:** [May 26, 2026, 5:15pm UTC](https://community.br-automation.com/t/how-to-find-source-codes-for-kit-etal310-1c05-1-and-etal410-1033-1/11359 "2026-05-26T17:15:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nguyenthanhtung](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/nguyenthanhtung/32/13296_2.png) [@nguyenthanhtung](https://community.br-automation.com/u/nguyenthanhtung)\
**Post date:** [May 26, 2026, 5:15pm UTC](https://community.br-automation.com/t/how-to-find-source-codes-for-kit-etal310-1c05-1-and-etal410-1033-1/11359/1 "2026-05-26T17:15:38Z")

</div>

Hello all,

I have two Kit ETAL310.1c05-1 and ETAL410.1033-1 but I don’t have the source codes.

Where can I find this source code or does anyone have it ?

Thanks,

Tung

---

<div class="post-metadata">

**Author:** ![michael.bertsch](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/michael.bertsch/32/239_2.png) [@michael.bertsch](https://community.br-automation.com/u/michael.bertsch)\
**Post date:** [May 27, 2026, 6:23am UTC](https://community.br-automation.com/t/how-to-find-source-codes-for-kit-etal310-1c05-1-and-etal410-1033-1/11359/2 "2026-05-27T06:23:46Z")

</div>

Hello,  
not for every Demo-ETAL we had a Sample Automation Studio Project.  
I had a look in the Download area, but it seams there is only a Manual. The ETAL System was discontinued.  
[Users Manual etal3101c05-1](https://www.br-automation.com/de/downloads/lern-und-lehrmaterial/eta-systeme/eta-light-system/integrierte-automatisierungstechnik/anwenderhandbuch-etal3101c05-1/)

@hubert.brunner Do you have a Sample Project in the Automation Academy for the ETALs mentioned above?

Greetings  
Michael

---

<div class="post-metadata">

**Author:** ![hubert.brunner](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/hubert.brunner/32/69_2.png) [@hubert.brunner](https://community.br-automation.com/u/hubert.brunner)\
**Post date:** [May 27, 2026, 6:48am UTC](https://community.br-automation.com/t/how-to-find-source-codes-for-kit-etal310-1c05-1-and-etal410-1033-1/11359/3 "2026-05-27T06:48:40Z")

</div>

Hi Tung,

for the ETA Light systems (ETAL310.1c05-1 and ETAL410.1033-1), there were no official, standardized Automation Studio demo projects provided.

These ETAL kits were mainly used within specific training formats (e.g., SEM210, SEM611, SEM415), where participants created simple mapp View applications themselves—often running in simulation—and implemented basic axis control scenarios based on the training exercises.  
So projects have been created from scratch for each training, as we have to show that our customers anyway.

BR Hubert