# Hypervisor not running **URL:** \ **Category:** Ask Questions\ **Created:** [October 23, 2026, 6:20am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075 "2026-10-23T06:20:30Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Michael\_Hasslach1](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@Michael\_Hasslach1](https://community.br-automation.com/u/Michael_Hasslach1)\ **Post date:** [October 23, 2026, 6:20am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075/1 "2026-10-23T06:20:30Z")
Hello Everyone, i have my first MappView projekt. I created project in Simulation first, everythink worked fine. now i get my PanelPc (5AP5230.215C with 5PPC2200\_AL18) I installed Hypervisor via USB as shown in Help without any issues. PLC is starting Runtime but not as expected in “Hypervisor mode”. PLC is running and i can connect Mappview in Browser with my Laptop as well. How to get PanelPc to start with showing my Mappview visualisation. Thanks for Help. (AS 6.5, MappView 6.7, Hypervisor is enabled in BIOS c1.36, MTCX 1.08) ---
**Author:** ![tommi.piiparinen](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/tommi.piiparinen/32/2183_2.png) [@tommi.piiparinen](https://community.br-automation.com/u/tommi.piiparinen)\ **Post date:** [October 23, 2026, 7:09am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075/2 "2026-10-23T07:09:00Z")
You should configure the GPOS to open the browser automatically. What GPOS(Windows / Linux) are you using? If you don’t have a GPOS with a modern browser installed, the PanelPC can’t show the mapp View visualization. ---
**Author:** ![Michael\_Hasslach1](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@Michael\_Hasslach1](https://community.br-automation.com/u/Michael_Hasslach1)\ **Post date:** [October 23, 2026, 7:32am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075/3 "2026-10-23T07:32:54Z")
Hello Tommi, thanks for reply. GPOS is Windows. My problem is, that PanelPC starts in Runtime and i don´t know how to boot in GPOS again. I can open BIOS but how to configure booting Windows. ---
**Author:** ![Michael\_Hasslach1](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@Michael\_Hasslach1](https://community.br-automation.com/u/Michael_Hasslach1)\ **Post date:** [October 23, 2026, 8:18am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075/4 "2026-10-23T08:18:09Z")
Hello, i tried to get it all done from the beginning. Create new USB-Installer and boot from USB. Now i can’t even install hypervisor. Message: install aborted: installation on legacy GPOS not possible. Please install UEFI GPOS. What does that mean? Windows wos installed and licensed and installation worked yesterday. ---
**Author:** ![jan.van-de-wielle](https://avatars.discourse-cdn.com/v4/letter/j/FF8800/32.png) [@jan.van-de-wielle](https://community.br-automation.com/u/jan.van-de-wielle)\ **Post date:** [October 23, 2026, 9:11am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075/5 "2026-10-23T09:11:56Z")
It appears that the Windows installation is gone from the flash card. This means you’ll need a new GPOS installation in order to proceed. Afterwards you can install the Hypervisor by booting from the USB or launching the install from Windows. Are you in possession of an image from the flash card before installing HyperVisor? If so, re-install that image. Otherwise you’ll need to contact your local B&R office in order to obtain a recovery image via our website. ---
**Author:** ![Michael\_Hasslach1](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@Michael\_Hasslach1](https://community.br-automation.com/u/Michael_Hasslach1)\ **Post date:** [October 23, 2026, 9:36am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075/6 "2026-10-23T09:36:02Z")
Thats we found out, Win10 is gone from CFast card, however this is possible without generating it. It never left the PanelPc? I downloaded my Win10 form homepage. Licencekey should be stored in Bios. What is the fastest way to install Win10 again. Directly on Laptop an CF-Reader? Is there a guidline available? ---
**Author:** ![jan.van-de-wielle](https://avatars.discourse-cdn.com/v4/letter/j/FF8800/32.png) [@jan.van-de-wielle](https://community.br-automation.com/u/jan.van-de-wielle)\ **Post date:** [October 23, 2026, 9:41am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075/7 "2026-10-23T09:41:14Z")
Not sure how this can happen to be honest. Never had a similar case. You can check the recovery solution documentation on the website on how to install the image: ![image](https://europe1.discourse-cdn.com/brcommunity/original/2X/3/306d404bafcf970377ab925f1bdbc11b7e8c5cfd.png) [download section for W10](https://www.br-automation.com/en/downloads/#categories=Software-1344987434933/Operating+systems-1344987435197/Windows+10+IoT+Enterprise+2021+LTSC-1678959614634) ---
**Author:** ![Michael\_Hasslach1](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@Michael\_Hasslach1](https://community.br-automation.com/u/Michael_Hasslach1)\ **Post date:** [October 23, 2026, 10:12am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075/8 "2026-10-23T10:12:17Z")
Thats how it should be done. My USB-Stick is just 8GB so to small for this operation. Trying to get a bigger one at the moment ---
**Author:** ![tommi.piiparinen](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/tommi.piiparinen/32/2183_2.png) [@tommi.piiparinen](https://community.br-automation.com/u/tommi.piiparinen)\ **Post date:** [October 23, 2026, 10:24am UTC](https://community.br-automation.com/t/hypervisor-not-running/13075/9 "2026-10-23T10:24:40Z")
For reference you can find some instructions for Hypervisor Installation here: [Hypervisor Installation Guide: Windows - Share Info & Ideas / How-To & Wikis - B&R Community](https://community.br-automation.com/t/hypervisor-installation-guide-windows/4593)