# Need plc program (x20 plc, servo drive, induction motor)

**URL:** <https://community.br-automation.com/t/need-plc-program-x20-plc-servo-drive-induction-motor/4263>\
**Category:** Mechatronics & Motion\
**Tags:** acopos, plc\
**Created:** [September 9, 2024, 2:55pm UTC](https://community.br-automation.com/t/need-plc-program-x20-plc-servo-drive-induction-motor/4263 "2024-09-09T14:55:57Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![duurbeen](https://avatars.discourse-cdn.com/v4/letter/d/FF8800/32.png) [@duurbeen](https://community.br-automation.com/u/duurbeen)\
**Post date:** [September 9, 2024, 2:55pm UTC](https://community.br-automation.com/t/need-plc-program-x20-plc-servo-drive-induction-motor/4263/1 "2024-09-09T14:55:57Z")

</div>

I HAVE B&R X20 CP1584 PLC, ACOPOS 1090 SERVO DRIVE, INDUCTION MOTOR.  
PLEASE PROVIDE PLC PROGRAM WHICH MAY OPEN WITH B&R AUTOMATION STUDIO 4.0.2. So I may figure out.

---

<div class="post-metadata">

**Author:** ![krausertm](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/krausertm/32/98_2.png) [@krausertm](https://community.br-automation.com/u/krausertm)\
**Post date:** [September 9, 2024, 3:05pm UTC](https://community.br-automation.com/t/need-plc-program-x20-plc-servo-drive-induction-motor/4263/2 "2024-09-09T15:05:45Z")

</div>

You can download AS here:

[AS 4.0.29.87 UP](https://www.br-automation.com/en/downloads/software/automation-studio/automation-studio-40/automation-studio-v40/)

Best regards,

---

<div class="post-metadata">

**Author:** ![duurbeen](https://avatars.discourse-cdn.com/v4/letter/d/FF8800/32.png) [@duurbeen](https://community.br-automation.com/u/duurbeen)\
**Post date:** [September 9, 2024, 3:44pm UTC](https://community.br-automation.com/t/need-plc-program-x20-plc-servo-drive-induction-motor/4263/3 "2024-09-09T15:44:19Z")

</div>

Thank you. I need plc program. Not automation studio.

---

<div class="post-metadata">

**Author:** ![kovarj](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/kovarj/32/537_2.png) [@kovarj](https://community.br-automation.com/u/kovarj)\
**Post date:** [September 10, 2024, 6:04am UTC](https://community.br-automation.com/t/need-plc-program-x20-plc-servo-drive-induction-motor/4263/4 "2024-09-10T06:04:35Z")

</div>

For PLC program, I mean source program you have to contact machine producer and developer of it. This is nothing we can provide you here.

---

<div class="post-metadata">

**Author:** ![krausertm](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/krausertm/32/98_2.png) [@krausertm](https://community.br-automation.com/u/krausertm)\
**Post date:** [September 10, 2024, 6:28am UTC](https://community.br-automation.com/t/need-plc-program-x20-plc-servo-drive-induction-motor/4263/5 "2024-09-10T06:28:01Z")

</div>

For general samples you can check out the AS motion examples. You should find them in the toolbox or in your installation folder (something like C:\BrAutomation\AS\Samples\Motion).

If your asking for a specific program from a machine: what Jaroslav said…

Best regards,