# New to B&R Servo Drives

**URL:** <https://community.br-automation.com/t/new-to-b-r-servo-drives/6759>\
**Category:** Mechatronics & Motion\
**Tags:** acopos\
**Created:** [April 27, 2025, 11:31am UTC](https://community.br-automation.com/t/new-to-b-r-servo-drives/6759 "2025-04-27T11:31:15Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![rana\_toqeer](https://avatars.discourse-cdn.com/v4/letter/r/FF8800/32.png) [@rana\_toqeer](https://community.br-automation.com/u/rana_toqeer)\
**Post date:** [April 27, 2025, 11:31am UTC](https://community.br-automation.com/t/new-to-b-r-servo-drives/6759/1 "2025-04-27T11:31:15Z")

</div>

helo  
sir i want the software to connect my servo drive acopos

---

<div class="post-metadata">

**Author:** ![rana\_toqeer](https://avatars.discourse-cdn.com/v4/letter/r/FF8800/32.png) [@rana\_toqeer](https://community.br-automation.com/u/rana_toqeer)\
**Post date:** [April 27, 2025, 11:32am UTC](https://community.br-automation.com/t/new-to-b-r-servo-drives/6759/2 "2025-04-27T11:32:05Z")

</div>

so provide me the software and tell me

---

<div class="post-metadata">

**Author:** ![marcusbnr](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/marcusbnr/32/256_2.png) [@marcusbnr](https://community.br-automation.com/u/marcusbnr)\
**Post date:** [April 27, 2025, 2:02pm UTC](https://community.br-automation.com/t/new-to-b-r-servo-drives/6759/3 "2025-04-27T14:02:36Z")

</div>

Hi Rana,

Welcome to the Community!

In order to program a B&R servo drive, you’ll need the B&R [Automation Studio](https://www.br-automation.com/en/downloads/software/automation-studio/automation-studio-6/automation-studio-v60/) software. You can use this software to create a program, download it to a B&R PLC or PC, and then diagnose any issues.

If you’re new to B&R, or new to B&R motion control, then I highly recommend you reach out to your [local B&R contact](https://www.br-automation.com/en/about-us/locations/) as this is a topic that usually requires some training. If you have any specific questions, you are welcome to post them here and the Community will assist as we are able.

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/brcommunity/original/1X/a202d64f0f03e22a662ed33fbbca6879f1efb794.jpeg) [@system](https://community.br-automation.com/u/system)\
**Post date:** [July 15, 2025, 9:28pm UTC](https://community.br-automation.com/t/new-to-b-r-servo-drives/6759/5 "2025-07-15T21:28:12Z")

</div>

Automatically bumped on July 15, 2025, 9:28pm UTC