# No acopos-multi diagnosis

**URL:** <https://community.br-automation.com/t/no-acopos-multi-diagnosis/3829>\
**Category:** Mechatronics & Motion\
**Tags:** acopos-multi\
**Created:** [July 20, 2024, 12:32am UTC](https://community.br-automation.com/t/no-acopos-multi-diagnosis/3829 "2024-07-20T00:32:17Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Estanislau\_2001](https://avatars.discourse-cdn.com/v4/letter/e/FF8800/32.png) [@Estanislau\_2001](https://community.br-automation.com/u/Estanislau_2001)\
**Post date:** [July 20, 2024, 12:32am UTC](https://community.br-automation.com/t/no-acopos-multi-diagnosis/3829/1 "2024-07-20T00:32:17Z")

</div>

I have a machine that has an ACOPOS-MULTI SAFE, when I try to run it the drive gives an error, but nothing appears in the plc diagnosis, this machine has another safe plc, is there any way to diagnose the DRIVE?

---

<div class="post-metadata">

**Author:** ![krausertm](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/krausertm/32/98_2.png) [@krausertm](https://community.br-automation.com/u/krausertm)\
**Post date:** [July 21, 2024, 2:42pm UTC](https://community.br-automation.com/t/no-acopos-multi-diagnosis/3829/2 "2024-07-21T14:42:22Z")

</div>

> [@Estanislau\_2001](#):
>
> ACOPOS-MULTI SAFE,

Hello!

You’ll need to provide a little more information.

- ACP10 / mappMotion?
- Sytemdump from the SDM: http://\<plc-ip\>/sdm
- Logger details from Automation Studio or the SDM
- Network Command Trace from AS or SDM
- LED status information of the drives

Best regards,

---

<div class="post-metadata">

**Author:** ![Estanislau\_2001](https://avatars.discourse-cdn.com/v4/letter/e/FF8800/32.png) [@Estanislau\_2001](https://community.br-automation.com/u/Estanislau_2001)\
**Post date:** [July 21, 2024, 3:06pm UTC](https://community.br-automation.com/t/no-acopos-multi-diagnosis/3829/3 "2024-07-21T15:06:17Z")

</div>

drive only has red LEDs (R/E and SE)

 ![WhatsApp Image 2024-07-21 at 12.03.23](https://europe1.discourse-cdn.com/brcommunity/original/2X/c/c958aa6b1aa15978f6078297a50a1af509822d61.jpeg)

in sdm it doesn’t say anything about the drive

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/brcommunity/original/1X/a202d64f0f03e22a662ed33fbbca6879f1efb794.jpeg) [@system](https://community.br-automation.com/u/system)\
**Post date:** [August 24, 2024, 3:53am UTC](https://community.br-automation.com/t/no-acopos-multi-diagnosis/3829/4 "2024-08-24T03:53:55Z")

</div>



---

<div class="post-metadata">

**Author:** ![kovarj](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/kovarj/32/537_2.png) [@kovarj](https://community.br-automation.com/u/kovarj)\
**Post date:** [September 6, 2024, 8:54am UTC](https://community.br-automation.com/t/no-acopos-multi-diagnosis/3829/5 "2024-09-06T08:54:40Z")

</div>

Hi Estanislav, have you found solution for your problem? If so, can you share it with us

---

<div class="post-metadata">

**Author:** ![Estanislau\_2001](https://avatars.discourse-cdn.com/v4/letter/e/FF8800/32.png) [@Estanislau\_2001](https://community.br-automation.com/u/Estanislau_2001)\
**Post date:** [September 23, 2024, 10:09am UTC](https://community.br-automation.com/t/no-acopos-multi-diagnosis/3829/7 "2024-09-23T10:09:52Z")

</div>

We didn’t find the root cause of the problem, but I noticed that the cable connection included a connection for the engine brake, but the engine has no brake, I removed the brake cables and the drive returned to normal, I couldn’t see the unit setting .