# Runtime directory Error when building solution

**URL:** <https://community.br-automation.com/t/runtime-directory-error-when-building-solution/8409>\
**Category:** B&R Software & Runtime\
**Tags:** automation-runtime\
**Created:** [September 17, 2025, 7:40pm UTC](https://community.br-automation.com/t/runtime-directory-error-when-building-solution/8409 "2025-09-17T19:40:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dionisio\_F](https://avatars.discourse-cdn.com/v4/letter/d/FF8800/32.png) [@Dionisio\_F](https://community.br-automation.com/u/Dionisio_F)\
**Post date:** [September 17, 2025, 7:40pm UTC](https://community.br-automation.com/t/runtime-directory-error-when-building-solution/8409/1 "2025-09-17T19:40:29Z")

</div>

Hi community,

I did a downgrade of the AS version from 4.2.14 down to 4.2.10 and afterwards I got the following error when I try to build or rebuild the project:

Error 9225: Could not find Automation Runtime directory K4.26.

I have check if the directory is in the project folder and also, re-install Runtime k.26, but it doesn’t fix the issue.

Have some of you guys experienced such an issue?

Thanks in advance 🙂

Regards,

Dioni

---

<div class="post-metadata">

**Author:** ![Dionisio\_F](https://avatars.discourse-cdn.com/v4/letter/d/FF8800/32.png) [@Dionisio\_F](https://community.br-automation.com/u/Dionisio_F)\
**Post date:** [September 18, 2025, 9:24am UTC](https://community.br-automation.com/t/runtime-directory-error-when-building-solution/8409/2 "2025-09-18T09:24:53Z")

</div>

Hi again,

For the record, I found the solution to the problem. I reloaded and applied the runtime version (the same: k4.26) using the “Change Runtime Versions” tool.

Then the project compiled normally without the error described in the previous post.

Dioni
