# Subject: Looking for B&R BRXTGR31 MaestroTERMinal, SPECTO\_S, and XT Setup Tool Software

**URL:** <https://community.br-automation.com/t/subject-looking-for-b-r-brxtgr31-maestroterminal-specto-s-and-xt-setup-tool-software/13035>\
**Category:** B&R Software & Runtime\
**Created:** [October 19, 2026, 8:21pm UTC](https://community.br-automation.com/t/subject-looking-for-b-r-brxtgr31-maestroterminal-specto-s-and-xt-setup-tool-software/13035 "2026-10-19T20:21:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cboy](https://avatars.discourse-cdn.com/v4/letter/c/FF8800/32.png) [@cboy](https://community.br-automation.com/u/cboy)\
**Post date:** [October 19, 2026, 8:21pm UTC](https://community.br-automation.com/t/subject-looking-for-b-r-brxtgr31-maestroterminal-specto-s-and-xt-setup-tool-software/13035/1 "2026-10-19T20:21:22Z")

</div>

Hello everyone,

I am looking for copies of the following legacy B&R software for the **BRXTGR31 HMI** :

1. **B&R MaestroTERMinal (SWMTERM-0)** – Original DOS-based PC terminal software.
2. **B&R SPECTO\_S** – Visualization programming and development software.
3. **B&R XT Setup Tool (SWMXTP-0)** – Installation and service software for the BRXTGR31.
4. **Original installation disks or disk images** – Including any required DOS utilities, OS-9 components, communication drivers, and supporting files.
5. **Technical documentation** – Particularly anything covering MaestroTERMinal serial communication, file transfers, and BRXTGR31 backup procedures.

If anyone has these programs, archived installers, or related documentation, I would greatly appreciate a copy.

Even partial software packages or older versions would be helpful.

Thank you in advance for your assistance!

---

<div class="post-metadata">

**Author:** ![kovarj](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/kovarj/32/537_2.png) [@kovarj](https://community.br-automation.com/u/kovarj)\
**Post date:** [October 20, 2026, 5:38am UTC](https://community.br-automation.com/t/subject-looking-for-b-r-brxtgr31-maestroterminal-specto-s-and-xt-setup-tool-software/13035/2 "2026-10-20T05:38:48Z")

</div>

Follow up of request published here. [B&R BRXTGR31 programming software - #22 by JobyWilliamson](https://community.br-automation.com/t/b-r-brxtgr31-programming-software/8083/22)

---

<div class="post-metadata">

**Author:** ![oliver\_D](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/oliver_d/32/257_2.png) [@oliver\_D](https://community.br-automation.com/u/oliver_D)\
**Post date:** [October 20, 2026, 5:39am UTC](https://community.br-automation.com/t/subject-looking-for-b-r-brxtgr31-maestroterminal-specto-s-and-xt-setup-tool-software/13035/3 "2026-10-20T05:39:34Z")

</div>

Hello @cboy

I just sent you Specto-S

I have never heard of the terminal software to be honest

best regards

Oliver