# SuperTrak target offset

**URL:** <https://community.br-automation.com/t/supertrak-target-offset/3729>\
**Category:** Mechatronics & Motion\
**Tags:** super-trak\
**Created:** [July 9, 2024, 12:08pm UTC](https://community.br-automation.com/t/supertrak-target-offset/3729 "2024-07-09T12:08:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![filip.sramek](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/filip.sramek/32/126_2.png) [@filip.sramek](https://community.br-automation.com/u/filip.sramek)\
**Post date:** [July 9, 2024, 12:08pm UTC](https://community.br-automation.com/t/supertrak-target-offset/3729/1 "2024-07-09T12:08:41Z")

</div>

Hi Community,  
I would like to ask if any of you know how to offset a SuperTrak target during runtime. I’ve tried using _StTargetExt_, but I haven’t been able to achieve any success. For this purpose, I’m using the Automation Academy SuperTrak demo, which works with this function block.  
Thank you!

---

<div class="post-metadata">

**Author:** ![filip.sramek](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/filip.sramek/32/126_2.png) [@filip.sramek](https://community.br-automation.com/u/filip.sramek)\
**Post date:** [July 10, 2024, 11:56am UTC](https://community.br-automation.com/t/supertrak-target-offset/3729/2 "2024-07-10T11:56:53Z")

</div>

SOLVED  
The problem was solved by overwriting the SuperTrak parameter ID.

---

<div class="post-metadata">

**Author:** ![michael.bertsch](https://dub1.discourse-cdn.com/brcommunity/user_avatar/community.br-automation.com/michael.bertsch/32/239_2.png) [@michael.bertsch](https://community.br-automation.com/u/michael.bertsch)\
**Post date:** [July 10, 2024, 3:35pm UTC](https://community.br-automation.com/t/supertrak-target-offset/3729/3 "2024-07-10T15:35:31Z")

</div>

You can use the “Solution” to mark you solved Post. Through this, the whole thread is marked as Solved.

Greetings  
Michael
