# Working with ACP3100 **URL:** \ **Category:** Controls & Vision\ **Tags:** automation-studio\ **Created:** [July 26, 2024, 11:38am UTC](https://community.br-automation.com/t/working-with-acp3100/3894 "2024-07-26T11:38:45Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![mateo.p](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@mateo.p](https://community.br-automation.com/u/mateo.p)\ **Post date:** [July 26, 2024, 11:38am UTC](https://community.br-automation.com/t/working-with-acp3100/3894/1 "2024-07-26T11:38:45Z")
I have now successfully uploaded the project program through the Cfast card, and have the power and Run led showing a solid green status and indicator, I can ping the IPC through the IP I have assigned it but I still cannot connect to it through AS by going into the online settings it does not pop up. If anyone has any troubleshooting suggestions they would be greatly appreciated. ---
**Author:** ![corne.geerts](https://avatars.discourse-cdn.com/v4/letter/c/FF8800/32.png) [@corne.geerts](https://community.br-automation.com/u/corne.geerts)\ **Post date:** [July 26, 2024, 12:14pm UTC](https://community.br-automation.com/t/working-with-acp3100/3894/2 "2024-07-26T12:14:17Z")
The browse for targets only works if the _Acivate SNMP_ setting is activated. ![image](https://europe1.discourse-cdn.com/brcommunity/original/2X/e/e25257809fed859a03630d2628de3d37b0243384.png) You are able to ping the ACP3100, so you could also add a new TCPIPconnection and define youre defined IP-address. ![image](https://europe1.discourse-cdn.com/brcommunity/original/2X/6/686173782a351d95dd2968b0db4898314817a859.png) ---
**Author:** ![mateo.p](https://avatars.discourse-cdn.com/v4/letter/m/FF8800/32.png) [@mateo.p](https://community.br-automation.com/u/mateo.p)\ **Post date:** [July 26, 2024, 1:02pm UTC](https://community.br-automation.com/t/working-with-acp3100/3894/3 "2024-07-26T13:02:42Z")
Thank you, I’m online now!