# \#arsim

**URL:** https://community.br-automation.com/tag/arsim/113.md

[Latest](https://community.br-automation.com/latest.md) · [Categories](https://community.br-automation.com/categories.md) · [Tags](https://community.br-automation.com/tags.md)

---

## [ARSim OPC Server Bound to 127.0.0.1 - How to Enable Network Access?](https://community.br-automation.com/t/arsim-opc-server-bound-to-127-0-0-1-how-to-enable-network-access/13031)

<div class="topic-metadata">

**Author:** [@StephanS](https://community.br-automation.com/u/StephanS)\
**Replies:** 5\
**Last updated:** [October 26, 2026, 8:02am UTC](https://community.br-automation.com/t/arsim-opc-server-bound-to-127-0-0-1-how-to-enable-network-access/13031 "2026-10-26T08:02:28Z")

</div>

Hello, I am running an OPC server locally in ARSim on IP address 127.0.0.1. I would like to access this OPC server from an external PLC over the network. According to the following post, it should be possible to change…

---

## [AR Sim Drive Simulation in AS6 with Torque Feedback](https://community.br-automation.com/t/ar-sim-drive-simulation-in-as6-with-torque-feedback/12784)

<div class="topic-metadata">

**Author:** [@Malte\_Feistmann](https://community.br-automation.com/u/Malte_Feistmann)\
**Replies:** 4\
**Last updated:** [October 19, 2026, 10:12am UTC](https://community.br-automation.com/t/ar-sim-drive-simulation-in-as6-with-torque-feedback/12784 "2026-10-19T10:12:11Z")

</div>

Hello there, I am currently playing around with the simulating capabilitys of AR Sim as part of writing a bachelors thesis on drivetrain simulation. Right now i have a simple setup of one acopos beeing connected to a si…

---

## [ARsim Startup won't startup at all](https://community.br-automation.com/t/arsim-startup-wont-startup-at-all/13009)

<div class="topic-metadata">

**Author:** [@SantasKleinerHelfer](https://community.br-automation.com/u/SantasKleinerHelfer)\
**Replies:** 6\
**Last updated:** [October 16, 2026, 8:34am UTC](https://community.br-automation.com/t/arsim-startup-wont-startup-at-all/13009 "2026-10-16T08:34:50Z")

</div>

Hi, I have an reocurring issue, where ARsim won’t startup and only shows this error in the logs: $arlogsys:EventID -2147453618 (WARNING, 0, 30030), lpBin=0x08f8fe5c, "PnPManager", "SS1.IF1" $arlogsys:EventID -21474536…

---

## [Acp10cfg version](https://community.br-automation.com/t/acp10cfg-version/12931)

<div class="topic-metadata">

**Author:** [@Farhan\_Ramadhan](https://community.br-automation.com/u/Farhan_Ramadhan)\
**Replies:** 1\
**Last updated:** [October 8, 2026, 5:33am UTC](https://community.br-automation.com/t/acp10cfg-version/12931 "2026-10-08T05:33:36Z")

</div>

I try to open and simulate my old project with Automation Studio 3, but when I try to build my simulation config it has this error Where can I download that version so I can do the simulation? I try searching on BnR …

---

## [AR sim goes offline after transfer( AS 4.12.5.95)](https://community.br-automation.com/t/ar-sim-goes-offline-after-transfer-as-4-12-5-95/12838)

<div class="topic-metadata">

**Author:** [@tanishqa](https://community.br-automation.com/u/tanishqa)\
**Replies:** 3\
**Last updated:** [October 1, 2026, 2:20pm UTC](https://community.br-automation.com/t/ar-sim-goes-offline-after-transfer-as-4-12-5-95/12838 "2026-10-01T14:20:38Z")

</div>

Hi, I am using Automation Studio 4.12.5.95 with ARSim U4.93. If I delete the Temp and Binary folders and start the simulation, ARSim comes up normally and shows RUN. However, after I Build and Transfer the project to A…

---

## [ARSim Reusability](https://community.br-automation.com/t/arsim-reusability/12657)

<div class="topic-metadata">

**Author:** [@Dietrich\_Wall](https://community.br-automation.com/u/Dietrich_Wall)\
**Replies:** 5\
**Last updated:** [September 17, 2026, 8:07am UTC](https://community.br-automation.com/t/arsim-reusability/12657 "2026-09-17T08:07:06Z")

</div>

Hello, I am working on a CI/CD pipeline for Automation Studio 6 projects. The goal is to compile, test, and release B&R-specific packages maintained on a Git server. To achieve this, I am trying to reproduce the entire…

---

## [Error aquiring lock on RPSHD](https://community.br-automation.com/t/error-aquiring-lock-on-rpshd/11674)

<div class="topic-metadata">

**Author:** [@Emil\_Hjelm](https://community.br-automation.com/u/Emil_Hjelm)\
**Replies:** 6\
**Last updated:** [July 27, 2026, 6:52pm UTC](https://community.br-automation.com/t/error-aquiring-lock-on-rpshd/11674 "2026-07-27T18:52:55Z")

</div>

Hello, After upgrading to Automation Studio 6, we started seeing issues when transferring a project to simulation. With a clean environment (Temp folder cleaned) the transfer and simulation works. But subsequent transfe…

---

## [Host name setting for ARSim](https://community.br-automation.com/t/host-name-setting-for-arsim/11665)

<div class="topic-metadata">

**Author:** [@jimlgb](https://community.br-automation.com/u/jimlgb)\
**Replies:** 7\
**Last updated:** [July 13, 2026, 7:07am UTC](https://community.br-automation.com/t/host-name-setting-for-arsim/11665 "2026-07-13T07:07:44Z")

</div>

Dears I am simulating a connection between ARSim(AS6.3) and HMI application(Movicon.NExT) by OPC UA Now I could browse OPC tags through UaExpert using IP address of ARSim. Unfortunately the HMI application uses hostna…

---

## [Error starting ARsim - no valid signature ar000.exe](https://community.br-automation.com/t/error-starting-arsim-no-valid-signature-ar000-exe/11789)

<div class="topic-metadata">

**Author:** [@Jurgen\_Weber](https://community.br-automation.com/u/Jurgen_Weber)\
**Replies:** 4\
**Last updated:** [July 2, 2026, 11:09am UTC](https://community.br-automation.com/t/error-starting-arsim-no-valid-signature-ar000-exe/11789 "2026-07-02T11:09:12Z")

</div>

With AS6.5.3.11 I have that problem that B&R Automation studio only build the ArSim directory ok. Here ok 02-07-2026 12:28:39 - COPYRIGHT (C) B&R Industrial Automation GmbH 02-07-2026 12:28:39 - No ARsim registration …

---

## [Run an application on a PC without automation Studio](https://community.br-automation.com/t/run-an-application-on-a-pc-without-automation-studio/10886)

<div class="topic-metadata">

**Author:** [@Edith\_Lesage](https://community.br-automation.com/u/Edith_Lesage)\
**Replies:** 2\
**Last updated:** [April 14, 2026, 1:50pm UTC](https://community.br-automation.com/t/run-an-application-on-a-pc-without-automation-studio/10886 "2026-04-14T13:50:37Z")

</div>

Hi Few years ago, it was possible to run an application on a PC that doesn’t have automation Studio. I gave a special file that I found under temp folder. I don’t remember how to do it. Is it still possible to do it? If…

---

## [Simulate plc is different](https://community.br-automation.com/t/simulate-plc-is-different/10620)

<div class="topic-metadata">

**Author:** [@ALEXYUN](https://community.br-automation.com/u/ALEXYUN)\
**Replies:** 6\
**Last updated:** [March 25, 2026, 10:12am UTC](https://community.br-automation.com/t/simulate-plc-is-different/10620 "2026-03-25T10:12:16Z")

</div>

The RUN PC is different with my configuration PLC :sob: :sob:

---

## [Automated Read/Write Access to ARSim Hardware I/O from External Tools](https://community.br-automation.com/t/automated-read-write-access-to-arsim-hardware-i-o-from-external-tools/10409)

<div class="topic-metadata">

**Author:** [@Christoph\_Moser](https://community.br-automation.com/u/Christoph_Moser)\
**Replies:** 10\
**Last updated:** [March 24, 2026, 10:46am UTC](https://community.br-automation.com/t/automated-read-write-access-to-arsim-hardware-i-o-from-external-tools/10409 "2026-03-24T10:46:41Z")

</div>

I have an existing project in Automation Studio 4.12 with all hardware modules configured. For development and testing I would like to run the same project in ARSim and interact with the hardware IO from an external app…

---

## [How to check if ArSim is activated during build](https://community.br-automation.com/t/how-to-check-if-arsim-is-activated-during-build/10048)

<div class="topic-metadata">

**Author:** [@stefan.bachmann](https://community.br-automation.com/u/stefan.bachmann)\
**Replies:** 1\
**Last updated:** [February 6, 2026, 12:50pm UTC](https://community.br-automation.com/t/how-to-check-if-arsim-is-activated-during-build/10048 "2026-02-06T12:50:33Z")

</div>

Hello everyone, Does anyone know if there is a way to check whether ArSim is activated or not during build events?

---

## [Devlink status 9999](https://community.br-automation.com/t/devlink-status-9999/10024)

<div class="topic-metadata">

**Author:** [@Matjaz\_Kopac](https://community.br-automation.com/u/Matjaz_Kopac)\
**Replies:** 1\
**Last updated:** [February 5, 2026, 12:35pm UTC](https://community.br-automation.com/t/devlink-status-9999/10024 "2026-02-05T12:35:15Z")

</div>

I am testing network connection between PLC application runing in AS simulator and other PC where I have shared folder. I want to use DevLink because the network credentials and folder path can be changed by end user any…

---

## [Can't activate Simulation/Watch](https://community.br-automation.com/t/cant-activate-simulation-watch/9548)

<div class="topic-metadata">

**Author:** [@Kotomiler](https://community.br-automation.com/u/Kotomiler)\
**Replies:** 3\
**Last updated:** [January 5, 2026, 6:07am UTC](https://community.br-automation.com/t/cant-activate-simulation-watch/9548 "2026-01-05T06:07:19Z")

</div>

Hi, Every time i open Automation Studio there’s a problem that shows: I can’t find the problem source, and when i want to compile and transfer my code to PC it shows: On the Bottom right of the application it sa…

---

## [Can't Activate Simulation](https://community.br-automation.com/t/cant-activate-simulation/5959)

<div class="topic-metadata">

**Author:** [@Farhan\_Ramadhan](https://community.br-automation.com/u/Farhan_Ramadhan)\
**Replies:** 5\
**Last updated:** [December 18, 2025, 8:36am UTC](https://community.br-automation.com/t/cant-activate-simulation/5959 "2025-12-18T08:36:11Z")

</div>

I tried to Activate Simulation in Automation Studio 4.8 but the “Offline” status on the bottom rightside still didn’t change to RUN or turn to orange color, but there isn’t any error? how can I solve this?

---

## [ARSim monitoring - "Connection to OPC UA server not possible"](https://community.br-automation.com/t/arsim-monitoring-connection-to-opc-ua-server-not-possible/5123)

<div class="topic-metadata">

**Author:** [@david.christensen](https://community.br-automation.com/u/david.christensen)\
**Replies:** 4\
**Last updated:** [December 9, 2024, 5:57pm UTC](https://community.br-automation.com/t/arsim-monitoring-connection-to-opc-ua-server-not-possible/5123 "2024-12-09T17:57:00Z")

</div>

I’m new to Automation Studio (using v 6.0.2.177), and I’m trying to learn to program via ARSim. I setup a test project with a Standard PC and transferred a simple program. When I click the ‘monitor’ button, I get an er…

---

## [Cant simulate offline](https://community.br-automation.com/t/cant-simulate-offline/8905)

<div class="topic-metadata">

**Author:** [@Okiki\_Goriola](https://community.br-automation.com/u/Okiki_Goriola)\
**Replies:** 7\
**Last updated:** [November 10, 2025, 7:59am UTC](https://community.br-automation.com/t/cant-simulate-offline/8905 "2025-11-10T07:59:52Z")

</div>

Hi Team, I’m very new to Automation Studio, although I already have hands-on experience with B&R hardware and a solid understanding of how your systems operate. Naturally, I’m now transitioning into the software side us…

---

## [ARSim 6.4.2 bug? Possibly modbus tcp related?](https://community.br-automation.com/t/arsim-6-4-2-bug-possibly-modbus-tcp-related/8638)

<div class="topic-metadata">

**Author:** [@BitBuster2](https://community.br-automation.com/u/BitBuster2)\
**Replies:** 7\
**Last updated:** [October 10, 2025, 10:46am UTC](https://community.br-automation.com/t/arsim-6-4-2-bug-possibly-modbus-tcp-related/8638 "2025-10-10T10:46:31Z")

</div>

Hello, Im currently unable to use my simulation because it keeps crashing when i upload my software on it. I can see in the ARSim startup the following log: $accsec:EventID 1073773104 (INFO, 0, 31280), "ROOT", "base l…

---

## [Transfer to PLC stuck at 100%](https://community.br-automation.com/t/transfer-to-plc-stuck-at-100/8584)

<div class="topic-metadata">

**Author:** [@Patrick\_Pennarts](https://community.br-automation.com/u/Patrick_Pennarts)\
**Replies:** 2\
**Last updated:** [October 3, 2025, 5:20pm UTC](https://community.br-automation.com/t/transfer-to-plc-stuck-at-100/8584 "2025-10-03T17:20:25Z")

</div>

Hi all, I seem to be posting a lot of questions/issues this week, sorry about that. I have gotten into trouble trying to transfer my program to my Arsim all of the sudden, a few days ago it was still working The trans…

---

## [Description	AR-RTK: EXCEPTION Unknown in simulation mode](https://community.br-automation.com/t/description-ar-rtk-exception-unknown-in-simulation-mode/8369)

<div class="topic-metadata">

**Author:** [@Rens\_B](https://community.br-automation.com/u/Rens_B)\
**Replies:** 5\
**Last updated:** [September 26, 2025, 11:57am UTC](https://community.br-automation.com/t/description-ar-rtk-exception-unknown-in-simulation-mode/8369 "2025-09-26T11:57:12Z")

</div>

Currently we are facing an AR-RTK: exception error in simulation mode on my windows laptop. I already tried an offline installation, deleted the temp folder. The strange thing is, this problem does not occur on the har…

---

## [Can't get to the ARSim web site](https://community.br-automation.com/t/cant-get-to-the-arsim-web-site/4062)

<div class="topic-metadata">

**Author:** [@heath.dillon](https://community.br-automation.com/u/heath.dillon)\
**Replies:** 26\
**Last updated:** [September 10, 2025, 12:16pm UTC](https://community.br-automation.com/t/cant-get-to-the-arsim-web-site/4062 "2025-09-10T12:16:38Z")

</div>

Hi, So I have been struggling with getting chrome to get to the default web site of ARSim http://127.0.0.1:81/index.html?visuId=MainVisu Some PCs it has worked, and on others I try it just ‘This site can’t be reached’…

---

## [ARSim via loader.exe and FileIO](https://community.br-automation.com/t/arsim-via-loader-exe-and-fileio/8151)

<div class="topic-metadata">

**Author:** [@Philip\_Pucher](https://community.br-automation.com/u/Philip_Pucher)\
**Replies:** 2\
**Last updated:** [August 29, 2025, 4:44am UTC](https://community.br-automation.com/t/arsim-via-loader-exe-and-fileio/8151 "2025-08-29T04:44:12Z")

</div>

Hi, currently I am facing a problem with the ARSim started with the loader.exe. After Startup I read out information from a file with the B&R Lib FileIO and publish it over an OPCUA server. When starting the ARSim wi…

---

## [VNC Viewer working with ARSim](https://community.br-automation.com/t/vnc-viewer-working-with-arsim/6881)

<div class="topic-metadata">

**Author:** [@Joel\_Gibb](https://community.br-automation.com/u/Joel_Gibb)\
**Replies:** 2\
**Last updated:** [August 12, 2025, 1:16pm UTC](https://community.br-automation.com/t/vnc-viewer-working-with-arsim/6881 "2025-08-12T13:16:46Z")

</div>

I can’t get my companies standard VNC viewer to work when running ARSim in AS 4.9.6.42 I am using PVI 4.9.2.9 Here is some relevant info: This project and Windows PVI software works on coworker’s Windows 10 PC I have…

---

## [Install Industrial IIoT Connector on 3rd-party embedded PC](https://community.br-automation.com/t/install-industrial-iiot-connector-on-3rd-party-embedded-pc/7613)

<div class="topic-metadata">

**Author:** [@thaold](https://community.br-automation.com/u/thaold)\
**Replies:** 5\
**Last updated:** [August 2, 2025, 3:03am UTC](https://community.br-automation.com/t/install-industrial-iiot-connector-on-3rd-party-embedded-pc/7613 "2025-08-02T03:03:25Z")

</div>

Dear All, I installed as the topic Innovation 2025 : Industrial IIoT Connector on 3rd-party embedded PC(x86\_64) without error. I have a problem with the license registration I tested the ArSim of the SuperTrak Dist…

---

## [ARsim stuck booting in Automation Studio](https://community.br-automation.com/t/arsim-stuck-booting-in-automation-studio/7512)

<div class="topic-metadata">

**Author:** [@Fabio\_Martini](https://community.br-automation.com/u/Fabio_Martini)\
**Replies:** 8\
**Last updated:** [July 10, 2025, 12:29pm UTC](https://community.br-automation.com/t/arsim-stuck-booting-in-automation-studio/7512 "2025-07-10T12:29:29Z")

</div>

Hello, I am experiencing an issue with ARsim in Automation Studio. As shown in the attached image, ARsim gets stuck at: BR Automation Runtime I4.90 booting… and never switches to RUN mode. I have already tried all …

---

## [Issue loading program to ARSim](https://community.br-automation.com/t/issue-loading-program-to-arsim/7510)

<div class="topic-metadata">

**Author:** [@kenneth.tham](https://community.br-automation.com/u/kenneth.tham)\
**Replies:** 3\
**Last updated:** [July 7, 2025, 6:16am UTC](https://community.br-automation.com/t/issue-loading-program-to-arsim/7510 "2025-07-07T06:16:20Z")

</div>

Hi, I am trying to run a test program on ARSim. I get the below error when I try to Transfer to target. Does anyone know what could be the issue? Thanks and Regards, Kenneth

---

## [User partition in AR Sim](https://community.br-automation.com/t/user-partition-in-ar-sim/7419)

<div class="topic-metadata">

**Author:** [@Raimund\_Achberger](https://community.br-automation.com/u/Raimund_Achberger)\
**Replies:** 1\
**Last updated:** [June 27, 2025, 7:46am UTC](https://community.br-automation.com/t/user-partition-in-ar-sim/7419 "2025-06-27T07:46:02Z")

</div>

Hello together, I use a User partiton on a plc in order to put some self created files e.g. tool data. So far so good. In order to use that at a ARSim i dont know how to do it. First: is it at least possible to creat…

---

## [Shared Memory Python example](https://community.br-automation.com/t/shared-memory-python-example/4642)

<div class="topic-metadata">

**Author:** [@christiaan.cloet](https://community.br-automation.com/u/christiaan.cloet)\
**Replies:** 4\
**Last updated:** [June 24, 2025, 5:58am UTC](https://community.br-automation.com/t/shared-memory-python-example/4642 "2025-06-24T05:58:28Z")

</div>

For HyperVisor and ArSim there is the possibility for using shared memory. On the AR side this is provided with libraries ArIscShm and ArIscEvent On the GPOS / Host side there is the brisc.dll The AS help comes with a…

---

## [Simulating springs/shock absorbers in ARsim](https://community.br-automation.com/t/simulating-springs-shock-absorbers-in-arsim/7325)

<div class="topic-metadata">

**Author:** [@s\_reilly](https://community.br-automation.com/u/s_reilly)\
**Replies:** 3\
**Last updated:** [June 18, 2025, 2:51pm UTC](https://community.br-automation.com/t/simulating-springs-shock-absorbers-in-arsim/7325 "2025-06-18T14:51:30Z")

</div>

Hello, I am using Automation Studio 4.12 (AS 4). What I am trying to do is to simulate a B&R motor displacing a spring/shock absorber. This displacement is to be controlled by PID. My question is how do I add in an el…

[Next page](https://community.br-automation.com/tag/arsim/113.md?match_all_tags=true&page=1&tags%5B%5D=arsim)
