Greetings, I cannot use the File Operations structure, which I have used frequently in my projects with Automation Studio in version 4.9.2.46, in version 4.12.5.95. I have to switch to this version due to the controller I use (X90CP154_60_00). I will tell you the structure I have set up as I used i…

If you define A:\ it tells the system to use partition A which does not exist in your case. As a solution see my reply above . You could also rename the filedevice in the config of the CPU: [image]

Hi @omer.alumur , due to missing code I can only speculate, but here are my findings and input: a) You used the name “HARDDISK” in your old config but “HDD” in your new one. Does your code reflect that change? b) Regarding not being able to use "D:" anymore: See B&R Online Help , scroll all the wa…

Hi @michael_w a-) Yes, I made the change in the part used in the code. I defined a macro for this and updated it in the same way as below. [image] b-) I also discovered that D and E cannot be used by using the help, so I did not use it in my new project, as you can already see. c-) I don’t know…

Okay, I’ll try it right away.

When I make the settings as shown here, I get the following error when transferring the project. Even though I reduced the Mib to 10, it did not improve. [image]

The system will have to make an initial installation since you need a new partition (F:) on the CF card. The easiest way would be to recreate the CF in a card reader if you have issues transferring…

The controller I’m using doesn’t have a cf card, I can just boot it and try to transfer the project again.

[image] Ömer Sezai Alumur: I also discovered that D and E cannot be used by using the help, so I did not use it in my new project, as you can already see. Yes I saw. But you asked about details, which I provided in my reply. [image] Ömer Sezai Alumur: because I saw that an example was gi…

After I booted the controller and reconnected, I tried to set my partition settings as Marcel did and tried to embed my project again, but it didn’t work. Is there any way to know the partition size I can use in my controller? Maybe 100 is too big for me.

You can check in “Online → Info → Partitions CF/HD”

Using File Operations in version 4.12.5.95

Ask Questions Controls & Vision

krausertm (Marcel Krausert) July 23, 2024, 12:53pm 3

To solve your D: issue: Configure a USER partition and save your data on the default “USER” file device!

Topic		Replies	Views
File open, create, close function blocks Programming library , runtime	13	534	August 16, 2024
20798 FileOpen Error Programming automation-studio , automation-runtime , plc , library , fileio	7	162	June 30, 2025
FTP sever, how to create and write in a file.txt or .csv Programming fileio	34	603	May 26, 2025
Problems with FileIO since AS6 Upgrade, Programming fileio , automation-studio-6	11	365	May 8, 2025
FileIO FileClose in ARSim Programming plc , fileio	3	127	November 24, 2025

Using File Operations in version 4.12.5.95

Related topics