PP45 CF card

Hello,

I’m new to PLC world. So we have a B&R PP45; unfortunately, our vendor closed the door for us a long time ago. We want to extract the CF card installed on PP45 to an editable software like Automation Studio. But I don’t know where to start. I greatly appreciate your help. Thank you.

Hi Harri, this is unfortunately not possible. Only compiled binaries files are stored on CF card, so you can copy but you can not upload and extract. You need project for that.

Ah okay. Thanks for your prompt response. We’ll start from scratch then :smiley:

if you have any questions, open points or doubt how to create your sw architecture the best, feel free to ask our community :slight_smile: