Dear experts, I have PC2200 with Window 10 operating system in hand. I’d like to run it parallelly with Automation Runtime Embedded. So, I have some questions: Do I need an Automation Runtime Embedded license to run Automation Runtime Embedded parallelly with Window 10? If you have experience wit…

Hi Jaroslav, Thanks for your supporting. Finally, it is done and working. One thing that I forgot is Enable Realtime Environment in BIOS setting. So, everyone can follow step by step the gerenated by AI in Jaroslav comment and do not forget enable Realtime Environment in BIOS setting. Thanks,

If you want to use Automation Runtime Embedded and a GPOS (Windows / Linux) together you will need a license for Automation Runtime Embedded and Hypervisor. If you want to use only Automation Runtime Embedded, you only need the Automation Runtime Embedded license.

Tommi’s answer is perfect. I would only add that you can test it “in the office” without a license. For real usage, you need to purchase a proper license.

Thanks, Tommi and Jaroslav for your answers. Without licence, can it run for xx minutes and then need to be restarted, right? I’ve tried creating a project by Automation Studio, transfer it to CFast card and put it in PC2200. But I can not communication with it by Automation Studio. Is there any sp…

Hi experts, Can anyone help me on this? How to install Automation Runtime Embedded on this PC and how to have online communication with it? Thanks,

If you want to installation ARemb with hypervisor, please see this link .

This answer is generated by our conversational help (powered by AI): To create a project and install Automation Runtime Embedded (ArEmb), NOT HYPERVISOR, on a PPC2200, follow these steps: Step 1: Create a Project in Automation Studio Open Automation Studio: Launch Automation Studio on your dev…

This is definely what I’ve done but can not communicate the PLC!

Thanks, I’ll check with this and come back with feedback!

That is fine. If you finished it properly, you are close. Can you share with us picture of your screen after power on? you should see version and state of your ARemb .

It is not close yet. Screen after power on is nothing, can’t see the version and state of ARemb.

Testing with PC2200

Ask Questions B&R Software & Runtime

pavel.vavra (Pavel Vavra) March 16, 2026, 9:48am 16

Hello and welcome to the community,

Have you tried another CF card?

Basically, if you follow Community Getting Started with B&R, you should be fine.

Topic		Replies	Views
Automation runtime in APC3100 B&R Software & Runtime automation-runtime , hypervisor	13	459	October 23, 2024
Hypervisor Installation Guide: Windows (WIP) How-To & Wikis hypervisor	1	1824	July 21, 2025
APC2100 Not taking AR file from USB Installation B&R Software & Runtime automation-runtime	3	59	February 10, 2026
Automation Runtime can't be found B&R Software & Runtime automation-studio , automation-runtime	5	540	May 25, 2025
Hypervisor: not enough memory B&R Software & Runtime hypervisor	15	584	June 20, 2024

Testing with PC2200

Related topics