Hi everyone, I’m new to both Automation Studio (AS) and CANopen protocols, and I need some help with setting up communication. I have a X20 CPU with an X20IF2772 CANopen interface connected to a CANopen slave device (servo drive), and I’ve imported it using an EDS file. Here are my questions: Ho…

Hi, please read the following posts: [image] How-to & Trace description guide: CanOpen Share Info & Ideas Basically B&R PLCs can either be CanOpen Masters or CanOpen slaves depending on the used hardware: CanOpen masters: X20IF1041-1 (CanOpen NetX master module) - th…

CanOpen Communication over X20IF2772

Ask Questions Controls & Vision

marcusbnr (Marcus Mangel) April 2, 2025, 1:56pm 4

Hi @samikshaunhale21

Do you have any further questions, or did the posts Christoph linked help you?

Topic		Replies	Views
How does the CANopen communication between X20IF1072 and a CANopen slave work? Controls & Vision can-open	3	185	February 19, 2025
Help with CANopen Communication using X20IF1041-1 Controls & Vision fieldbus , can-open	18	744	December 12, 2024
How to read values from a Device which has CANOpen Controls & Vision fieldbus	8	678	November 6, 2024
CAN open communication using X20CS1070 Controls & Vision fieldbus	3	271	April 8, 2024
Canopenslave communication for read/write pdos Controls & Vision can-open	6	183	May 23, 2025

CanOpen Communication over X20IF2772

Related topics