I have AS6.0.2.177 installed and i imported a project from AS4.12. When i do the build, everything is fine. Then i clicked "Transfer " and transfer started .Its been more than 2 hours and still it is in the below shown state: [image] Is there something which needs to be done additionally while t…

Hi Jaroslav, thanks for the help. I tried to see in logger and then it showed error with a module which was in the configuration. As i dont need it , i removed it frm Prj and also physically. Now i am able to flash it. Thanks for the tip with Logger. Learned something new again . Thanks & Regards

Hanging during transfer to target AS6

Ask Questions B&R Software & Runtime

kovarj (Jaroslav Kovar) June 26, 2025, 6:28am 8

Logger you can read using Automation Studio or System diagnostic manager. Service Mode - What is it and how to collect diagnostics

Topic		Replies	Views
Connexion on X20 CP 0482 with AS 6 B&R Software & Runtime automation-studio-6	6	225	May 21, 2025
PLC Ethernet connection B&R Software & Runtime automation-studio-6	5	241	October 2, 2025
Can't find PLC Online. AS 4.9 B&R Software & Runtime automation-studio , automation-runtime , plc	15	412	March 18, 2025
PLC - Service error - during transfer B&R Software & Runtime automation-studio , automation-runtime	1	166	November 26, 2024
PLC module stuck in "BOOT mode: Service" - unexpected reboot and connection issues B&R Software & Runtime t-c-panels , automation-studio-6	12	345	October 9, 2025

Hanging during transfer to target AS6

Related topics