Hello community, did anyone happen the problem that TiaPortal (V17) could not find the Opc Ua Server that is on our PLC? Via UaExpert it was able to find and connect to it, but via TiaPortal it can’t. If the OpcUa Server is created in Simulation, client connect to server via TiaPortal. Is there an…

Hi Martin, checked this post. https://support.industry.siemens.com/forum/cz/en/posts/no-opc-ua-server-application-found/284417 If UAExpert is able to connect then problem is very likely in configuration on TIA portal side. Check security configuration…

Siemens Tia Portal V17 cant find our Opc Ua server

Ask Questions

kovarj (Jaroslav Kovar) Split this topic December 5, 2024, 12:34pm 8

A post was split to a new topic: How to read value from B&R OPCUA server using TIA portal

Topic		Replies	Views
How to read value from B&R OPCUA server using TIA portal Ask Questions automation-runtime , opc-ua	4	278	December 13, 2024
OPC UA Server enable steps for X20CP1584 Ask Questions	15	777	May 13, 2024
AS4.12 - mappView similation Connection to configured OPC UA server failed Ask Questions mapp-view , opc-ua	8	172	February 18, 2025
Opcua_any --> no connection to the server Ask Questions opc-ua	10	128	April 2, 2025
OPC UA data collection Ask Questions plc , opc-ua	18	236	June 6, 2025

Siemens Tia Portal V17 cant find our Opc Ua server

Related topics