Hello everyone, Project description: 2 units of VSS122R22.051P-000 (Smart Sensor) - VfMatching 1 unit of VSC123R22.051P-000 (Smart Camera) - VfMatching + DeepOCR Issue description: When loading new vision application to the smart camera (ViBaseLoadApplication) , the smart camera will miss the …

Hello, thank you for the data. As I see in the trace there are 6 imageAcquisition requets but only 5 images taken. Is that right? The image which was not taken was the first one. As you can see with the acceptedAcquisitionCnt the camera is not accepting the the first imageAcquisition trigger. I…

Hard to say with just this information available. Could you add the CameraStatus datapoint to the trace, or check how it behaves? Automation Help: Cyclic Image Acquisition Data

Hello, The camera only accepts image trigger when CameraStatus = 0 (or ImageAcquisitionReady = TRUE). In your case, this is likely not true due to the loading of the new Vision Application, which causes a short delay. During this time, the camera is not ready to acquire images, as indicated by Ca…

Hello @tommi.piiparinen and @muehlauer , Thanks for your response! Unfortunately, I don’t have access to the camera at the moment, but I’ll make sure to capture a more detailed trace once I’m able to connect to it. Regards, Alvin

Hello @muehlauer , Thanks for the advice on checking for new image acquisition. I’ll keep that in mind for future projects. Regards, Alvin

Hey guys, I got the trace from the machine. Hopefully it provides more information about the issue. [image] Also, from the system dump, I got these empty errors coming from VfMatching on the smart camera (gCamera1). [image] I’ve tried to search the error in Automation Help but I can’t find a…

Hello, Unfortunately, the transitions are difficult to see in the trace image. Can you please upload the trace directly? While we’re at it, please also upload the log file. Best regards, Florian

Hello Florian, Here are the trace and log. Best regards, Alvin SmartCamera_Issue.zip (2.3 MB)

Smart Camera Doesn't Capture First Few Images After Loading New Vision Application

Ask Questions Controls & Vision

tullio.quirini1 (Tullio Quirini) October 15, 2025, 7:39pm 10

Good points ! Thank you for this details

Topic		Replies	Views
Camera status-Not enough free image memory Controls & Vision mapp-vision	7	84	November 25, 2025
Machine Vision Lightbar Flashes but Camera Captures Black Image Controls & Vision machine-vision	3	136	June 5, 2025
Smart Light doesn't flash when triggered Controls & Vision smart-camera , smart-light	7	64	February 26, 2026
Camera Getting Stuck Controls & Vision mapp-vision	5	116	April 2, 2026
How to display smart camera images in real time in mappView interface? Controls & Vision mapp-view , mapp-vision	11	1541	January 2, 2025

Smart Camera Doesn't Capture First Few Images After Loading New Vision Application

Related topics