I can log into the PLC online, but I receive this error when making changes and during transmission. A connection via ANLS is required for the transmission to be carried out properly.

[image] Try adding /INA=0 to the Extra CPU settings in the online settings view. This column may need to be added to the view. This setting will force the connection to be ANSL instead of INA. Restarting PVI and/or your computer may fix it temporarily but this modification will make sure it will no…

You should have already set up an ANSL connection. This is actually the modern connection if you are using a current CPU and a current Automation Runtime. Presumably the connection simply breaks off when you transfer your project. There are of course a number of errors that are possible. The reason…

To be honest, ever since there is an ANSL connection in AS, I notice this behavior once in a while. Right now, I was struggling with a X20CP1381 that out of a sudden would only connect with INA. Normally in such a case, I restart the AS and am back with ANSL. But not today. Also restarting the PLC …

This was exactly it, thank you for the solution

A connection via ANLS is needed to execute transfer properly error

Ask Questions Mechatronics & Motion

eem.ferhat (dmr) January 6, 2025, 5:35pm 3

Dear Administrator, I did these, yes, PC PVI Manager is shutting down.

Topic		Replies	Views
Can't find PLC Online. AS 4.9 B&R Software & Runtime automation-studio , automation-runtime , plc	15	432	March 18, 2025
Problem running project in simulation mode in Automation Studio B&R Software & Runtime automation-studio	4	211	December 1, 2025
Connexion on X20 CP 0482 with AS 6 B&R Software & Runtime automation-studio-6	6	234	May 21, 2025
11022 ANSL Communication connection aborted B&R Software & Runtime automation-studio	2	133	October 15, 2025
Trouble Connecting to X20CP1483 via PVI / ANSL – Port 11169 Visible but Unable to Establish Connection B&R Software & Runtime x20 , automation-runtime , pvi	5	105	February 2, 2026

A connection via ANLS is needed to execute transfer properly error

Related topics