Hello everyone, rookie question here. How do I establish connectivity between the 4PPC30 panel and the BC0087 bus controller via Modbus/TCP? I figured it could be straight forward since both are B&R products, and I might have not done it right somewhere. [image]

Hi Eren, You can use Automation Studio to configure the X20BC0087. This generates a XML which has to be transferred to the module by the ModbusTCP Toolbox. This is explained in the Modbus TCP User’s Manual. You can find it in the downloads section of the module in our webpage: X20BC0087 | B&R Indu…

Connectivity between 4PPC30.043F-21B & X20BC0087 via Ethernet

Ask Questions

kovarj (Jaroslav Kovar) Split this topic December 4, 2024, 2:57pm 6

A post was split to a new topic: How exactly is AS used to configure Modbus IO station to generate an XML for use with ModbusTCP Toolbox?

Topic		Replies	Views
Connecting Cognex Barcode Scanner Ethernet IP Ask Questions automation-studio , plc	14	538	March 18, 2024
Modbus buscoupler X20BC0087 + X20CS1030 Ask Questions fieldbus , modbus	5	351	April 16, 2024
Connecting a new PLC module (BB80) Ask Questions x20 , automation-studio	11	146	September 26, 2024
MODBUS TCP on X20 CP1584 PLC Ask Questions modbus	2	68	January 28, 2025
Reading Modbus/TCP IP data in CP3586 using ETH ( IF2) Port Ask Questions automation-studio , plc , modbus	2	83	October 31, 2024

Connectivity between 4PPC30.043F-21B & X20BC0087 via Ethernet

Related topics