Hi, I have a problem with a machine that runs on a 3CP360.60-1 (Automation Runtime A03.01) it is CNC machine with 10 ACOPOS (1090, 1045, 1640). The machine has many problems but I’m not familiar with the 3CP360 PLC, so my question is if there is a way to connect to that PLC and get a logger or if th…

@Jose_Veliz please let’s focus on Ethernet connection and tell me if you can ping your CP360, if yes try with runtime utility center to upload the system logger. Last note regarding serial communication (again we want to use Ethernet in our case): I see a little more details in the old TM, I thin…

[image] Jose_Veliz: 3CP360.60-1 Hi @Jose_Veliz , I see your frustration , Unfortunately 3CP360.60-1 is quite old: [image] Which is the status of LED? [image] For the communication we have an RS232 interface: [image] More details about the serial cable : [image] Please share with …

Hi, thank you for your response Sorry I didn’t mention this but I’ve tried serial communication with RUC and this script The serial number is 56520186979 This is the online settings tab on AS 4.2 [Screenshot (6) - Copy] This is the error I get sometimes [IMG20260121100238 - Copy] Status LEDs …

Great you are connected! You have everything just upload the logger and attach to this post. Status LED, the third one > Error > on > your system is in service…not good…Why? We need logger I think your prj was made with AS 2.x and I don’t have installed that in my laptop, but with AS 4.2 follow th…

Hi, thank you for the quick response It seems like I’m connected (the plc shows with bold font) but when I try to get the logger it doesn’t do it, also AS doesn’t shot the PLC status Run, Serv, Boot etc. so my question is if AS 4.2 should be compatible with this PLC or I need to download a differen…

not really you show me a list of PLC in your network, and fortunately we see your machine with Ethernet connection. You have to select that line, right click and select connect: [image] after you should see “RUN“ or “SERVICE“ [image] In AS 4.2 I see I configure your CPU so I think we are fine…

Hi, about the “source address 1 exists…” error message please check the following thread: [image] Hardware problem: Ethernet node with source address 1 exist more then once HMI & Visualization Hi I am Anna, a student of University of Padua. I’m working on Au…

Hi Jose, I’m a bit worried, you write about a serial connection and also about a ethernet connection. Is the serial connection working with the script you mentioned? If the line is in bold letters it only means, that this connection is the active one AS is trying to use, but not that a connection…

Hi @Jose_Veliz , sorry but in my first answer I should tell you immediately for troubleshooting (for the connection with you PC) you have 2 interfaces available Serial and Ethernet: [image] Around 20 year ago not all our CPU supported Ethernet interface so when I saw the serial one I thought “o…

To be honest I did try the script but the script gave me the Unable to detect serial connection message and I didn’t try the serial communication with Automation Studio, maybe I should try that and use a different cable. I will try that and will try what @alexander.hefner posted about the INA addres…

Any news @Jose_Veliz ? Ciao Valerio

Diagnose CP360

Ask Questions B&R Software & Runtime

alexander.hefner (Alexander Hefner) January 23, 2026, 5:52am 9

Hi,

about the “source address 1 exists…” error message please check the following thread:

Best regards!

1 Like

Topic		Replies	Views
Can't find PLC Online. AS 4.9 B&R Software & Runtime automation-studio , automation-runtime , plc	15	433	March 18, 2025
Cpu x2p cp1484 does not connect online B&R Software & Runtime automation-studio	31	1457	April 2, 2024
Obtaining Automation Runtime V2.49 for PowerPanel 35 B&R Software & Runtime automation-runtime	2	28	March 13, 2026
X20cCP1586 not appearing in the "Target type description" Section of Automation Studios Controls & Vision x20 , automation-studio , plc	10	475	February 12, 2025
CP0291 runtime & automation studio 3.0.90 B&R Software & Runtime automation-studio , automation-runtime , plc	6	184	December 2, 2025

Diagnose CP360

Related topics