the systerm design like the follow image，We had a potential opportunity where the customer asked APC910 to connect two Automation Panels through SDL and display the same machine operation page, but needed to make sure that while one of the Automation Panels was being operated, the other one could no…

Hi, to be honest I’m not sure what you’ve done exactly until now, can you please give us some more detail information? Are you using the ADI SDK (DLL or .NET?) with Windows 10 as operating system? And if yes, have you written an own implementation based on that SDK, or do you use the ADI OPC UA s…

Hi We use the ADI.NET with Windows 10 as operating system, the panel is " 5AP1130.185C-000",The Attached is the code we used，and now when “gPannelCtrlSelect = 2” panel 1 is locked and panel 2 can operate,but “gPannelCtrlSelect = 1” there is none of the panels are locked.The same code, when contr…

Hi, okay, first I would recommend to check if the MTCX and the SDLT / SDLR firmware versions on the APC910 and the panels have all the most actual version. Also, please check the panel numbers if it’s they’re same on APC3100 and APC910 by having a look into the ADI control center. I’m not sure and…

Thanks a lot, I have a question if the panel numbers are the same then how do we lock the different panel?

Hi, that’s a really good question, I haven’t seen this until now that panels connected to the same APC have the same panel number. I only remember that panels can have number from 0…15 depending on where and how they’e connected. Do you have 2 panels connected, and both have the same number? Can y…

Hi, good to hear it works, thanks for the response! Bes regards!

How to lock the screen of Automation panel With SDK function

Ask Questions HMI & Visualization

zhibin.zhong (Zhibin Zhong) July 31, 2024, 9:10am 7

Thanks Alexander,We read the panel number through the ADI Control center，The test is normal after the panel number is changed to the correct one.
Thank you for your advice and experience

Topic		Replies	Views
IF we can use SDK functions to lock four diffrent panels on one APC910 or APC3100? HMI & Visualization apc-ppc , touch	2	91	November 24, 2024
How to lock the multi-touch screen of Automation Panel HMI & Visualization automation-panel	4	289	April 8, 2024
Connect Automation Panel 900 SDL with APC4100 SDL4 HMI & Visualization automation-panel , apc-ppc	4	246	June 27, 2025
Touch Lock Driver not working HMI & Visualization gpos , touch	3	156	June 23, 2025
B&R PC910 and automation panel 900 HMI & Visualization apc-ppc	6	425	December 10, 2024

How to lock the screen of Automation panel With SDK function

Related topics