Hi, I am using an APC3100 (5APC3100.KBU1-000) and I tried to boot Hypervisor but without success. While booting initialy after the setup, the system comes to a halt while performing the second boot. After conducting a power cycle the Hypervisor boot failes even earlier. Seems like data got corrupt…

closed due to inactivity. Can be reopened anytime if additional discussion is needed.

Hypervisor failed boot after installation

kovarj (Jaroslav Kovar) November 8, 2024, 6:42am 4

Hi Philipp , Is this problem solved? just asking because second topic created by you APC2200 BIOS clock issue

Topic		Replies	Views
Hypervisor boot error! Ask Questions hypervisor	8	387	April 25, 2024
Hypervisor 1.7.0.3 stuck in boot after installation Ask Questions hypervisor	5	139	November 5, 2024
Installation of BRHypervisor 1.7.0 on brl-12_1.0.3 Ask Questions hypervisor	6	111	January 29, 2025
APC2200 BIOS clock issue Ask Questions hypervisor	5	103	November 14, 2024
Eth 1 apc3100 freeze Ask Questions hypervisor , unsolved	12	272	June 30, 2024