[IMG-20240427-WA0008] The APC 910 is stuck in standby mode. Power button is red in color(Not blinking) HDD is yellow in color. I have tried restarting several times but still stuck in this state. The HMI is off completely not getting on.

If you do not get the PC to run even though power supply is ok then this looks like a HW problem. You can try to unplug everything from the PC (CFast, IF options, USB devices) and power it on. If it still does not react and you do not see anything on the the screen you should send the PC to B&R repa…

unplugged everything from it . And powered back ON .Still stuck in standby mode

Hm then please use standard repair channel.

Can’t be a power board since its getting power. Could it be the HDD?

if you have HDD, you can try to unplug it. APC without HDD and CFAST card should boot to EFI shell (if efi boot is used) and you should at least get into BIOS.

apparently the Cfast slot is empty. So, i removed the HDD. Tried powering it. But still got stuck on solid red power and HDD. yellow

My Automation PC 910 stuck in standby mode

Ask Questions HMI & Visualization

kovarj (Jaroslav Kovar) April 29, 2024, 11:05am 8

As I mentioned. There is nothing we can do more.

Topic		Replies	Views
Automation PC 910: Stuck in Standby mode (Power LED still RED) B&R Software & Runtime apc-ppc , automation-runtime	4	1704	October 12, 2025
Computadora apc se queda en modo standby/APC Computer Stays in Standby Mode Mechatronics & Motion acp10	2	287	October 5, 2024
Automation PC 910 Stuck in Standby Mode – Request for Repair Assistance HMI & Visualization apc-ppc	4	199	June 23, 2025
Automation APC 910: Power LED Green, but the APC didn't run HMI & Visualization apc-ppc , automation-runtime	5	659	October 15, 2024
APC 910 Fault code HMI & Visualization apc-ppc	4	347	December 20, 2024

My Automation PC 910 stuck in standby mode

Related topics