First of all ,your support is highly appreciated I have power panel 4pp035.0300.01 and i have cable RS232 where one terminal is 9 pin and other terminal is usb The question is how can i establish a successfully connection between LAPTOP and power panel ? As when using this cable and automation st…

[image] It has been a while since the last information on this ticket, but in case you are still trying to connect to the PLC, I will try to chime in. The above shows the correct pinout for the RS232 cable you should use to connect to the PLC. We have used a tool here to perform a “serial sweep”…

Power panel 4PP035.0300-01

Ask Questions

alexander.hefner (Alexander Hefner) May 13, 2024, 7:38pm 11

Additionally, you can also check the following post for some information about serial online connection.

Best regards!

Topic		Replies	Views
Power control 4pp035 Ask Questions	10	161	March 24, 2024
Problem with the online connection to Power Panel 65 Ask Questions power-panel , automation-studio	16	150	July 15, 2024
Can't connect to X20CP3584 Ask Questions automation-runtime	11	733	April 8, 2024
Automation Studio <-> PLC connection via Powerlink Ask Questions powerlink	4	424	February 2, 2024
Unable to find hardware configuration online Ask Questions automation-studio	14	2021	February 22, 2024

Power panel 4PP035.0300-01

Related topics