Dear masters, My company is using HMI 4PP015.0420-36. We buy a new one for backup. We use Automation studio v4.10 to backup hardware and software through RS232 cable. We can make new project by “Identify hardware configuration online”, and hardware information is read as below: Model number: 4PP0…

By default only the compiled binaries are transferred to the controller. As you have already tried the correct procedure for uploading the source(project) files from the controller and it reported that they are not there, it is not possible to upload the project from the controller.

Upoad project inside 4PP015

Ask Questions

alexander.hefner (Alexander Hefner) December 2, 2024, 7:14am 4

Hi,

as you’re using a SG3 system, maybe the following post will help you:

Best regards!

2 Likes

Topic		Replies	Views
Upload program from PLC SG2003 Ask Questions automation-studio	4	290	December 4, 2024
B&R 7CP467 PLC - how to upload source project Ask Questions automation-studio , plc	2	64	February 27, 2025
Upload(back up)from power panel 400 Ask Questions power-panel	2	262	February 21, 2024
Power control 4pp035 Ask Questions	10	180	March 24, 2024
Automation Runtime version V2.52 Ask Questions automation-runtime	6	168	November 1, 2024

Upoad project inside 4PP015

Related topics