ACOPOStrak compact 180° curve HW-Upgrade and SW-Version

[kovarj (Jaroslav Kovar)]

Hi @florian.niederhofer, thanks for important info. I just copy content of your word document as a new article that is possible to find it using search function

Thanks for sharing.

How to RESET ACOPOStrak Segments to BSL

1. Make sure that the right mapp Motion version is on your PLC/APC (mappMotion V6.4.1) 2. Configure your system and cabling for single use of a 180 compact segment 3. Disable Power Supply of the segment 4. Disconnect PLK connection of the segment 5. Plug in Display (should not be powered on because of segment powered off) 6. Press and hold button1 and button4 of the display [image] 7. Power on the segment (no PLK connection) 8. “connectin…