Hello teams,
I want to share with you the last update regarding the issue detected on my APC.
- Unplug all devices connected.
- Unplug the battery.
- Keep the APC without power.
- Put the SDD that contains the original windows and our ACCS program.
- Switch on the power again.
- Startup. nsh window poped, and we chose the SDD config from bios.
- APC returned to normal status and the problem was solved.
Dear @oliver_D , Please note that we try now to redo the Windows image setup for the other APC with the same configuration, and we will check the result. Once this task is finished, I will share with you the result.
Thank’s.
Thank’s you team for your support 