I have 4.7.6.114 Automation Studio with 4PPC50.121E-13A panel project, Hardware module 4PPC50.121E-13A - 1.1.4.0 mappservices 5.15.1 mappview - 5.24.1 , PPC5x - F4.73 . Last time I’m experiencing problems with ARsim: whole application stops working and there is no possibility to connect, untill…

Thank you Jaroslav! Thank you Marcus! The problem was in one section that caused massive index out of bound exception, that lead to slow down the section. ARSim was stopped because of this issue, but WDT time was long enough to not produce same problem on real hardware.

Does this happen immediately or after some time? ARsim works for 2 hours until it stops itself when used without a ARsim license. Just restarting the ARsim is enough, no need to restart the whole Automation Studio.

just to complete information from Tommi, here is the link to AS help about ArSim license B&R Online Help

Thank you Tommi! It happens literaly after few actions (clicks), much before 2 hours limit is expired. The project worked fine two weeks ago, but something went wrong last time . The real device (panel) shows no problems, no wdt/service mode issues are detected. Can it be size of project issue? It…

I’ve never heard of an issue like this happening due to the size of the project; it will naturally get bigger as you add programs, mappView pages, etc. Sometimes there are issues with the project build if the project path is too long, but since it sounds like the project is building okay that doesn’…

Then I would say disable all application tasks. Check that ARsim behaves properly and then enable task one by one. Very likely there is one which causes this issue.

happy to hear it. Please mark this question as a solved then :slight_smile:

Automation Studio 4.7.6.114 ARSim stops working

Ask Questions B&R Software & Runtime

kovarj (Jaroslav Kovar) February 9, 2024, 6:02am 8

happy to hear it. Please mark this question as a solved then

Topic		Replies	Views
Arsim fails to boot B&R Software & Runtime automation-studio	20	3361	July 7, 2025
ARsim stuck booting in Automation Studio B&R Software & Runtime arsim	8	253	July 10, 2025
AR simulation not start HMI & Visualization automation-panel , mapp-services , mapp-view , automation-studio , automation-runtime	2	583	April 10, 2024
Archive Error in ArSim B&R Software & Runtime automation-studio , automation-runtime	10	869	March 7, 2024
Cant simulate offline B&R Software & Runtime arsim	7	241	November 10, 2025

Automation Studio 4.7.6.114 ARSim stops working

Related topics