Hello, i use AS6.5 and MappCockpit 6.6.0 [image] A new topic in MappCockpit is “Commissioning function” of axis. Unfortunately, this function is not listed. [image]

MappSafety 6.4.0 disturbs the Motion commissioning buttons.. Update your MappSafety to 6.4.1.

Hi @Bernard_Griot , for default that settings is not visible in the MappCockpit configuration file [image] [image] I like a lot this post made by Michael about mapp Cockpit: Guide: Work with mapp Cockpit Thanks Ciao Valerio

Hello, The Commissioning Function is only available for ACOPOS Axis which use AcpAx Library, as far as i know. Which type of Axis did you use? Greetings Michael

Axis are listed in Mapp Cockpit but only with “Common”. it is missing “Commissioning”

Hello, The Reqired Library McAcpAx McStpAx McDS402Ax McPureVAx McAcpInvAx is dependent on the Hardware you use. It could be that the requried Library is not yet part of LogicalView. Sorry if my question lead you to logical View but it is not the answer we looked for. On which Hardware Implement…

Thank you for your help! Nice evening.

Commissioning in Mapp Cockpit

Ask Questions B&R Software & Runtime

valerio.manenti (Valerio Manenti) March 26, 2026, 7:27am 2

Hi @Bernard_Griot ,
for default that settings is not visible in the MappCockpit configuration file

I like a lot this post made by Michael about mapp Cockpit: Guide: Work with mapp Cockpit
Thanks
Ciao
Valerio

Topic		Replies	Views
AS6 and mappCockpit B&R Software & Runtime automation-studio	8	503	March 4, 2025
Mapp cockpit - no component and traces available Mechatronics & Motion mapp-cockpit	1	60	February 5, 2026
Guide: Work with mapp Cockpit How-To & Wikis mapp-cockpit	4	2898	January 19, 2026
ERROR 427, Needed module mpcom of required range from V0.00 up to all higher versions not installed. 427 Mechatronics & Motion automation-studio , mapp-motion	6	307	December 3, 2024
AS6.3.4 mapp motion issue: axis configuration problem Mechatronics & Motion mapp-motion	14	210	December 18, 2025

Commissioning in Mapp Cockpit

Related topics