HI I have X20CP1585 and X20BC1083 awith DIMODULE,DOMODULE CONNECTEDTO THE POWERLINK BUSbut when try to monitor Di MODUL OK WAS FALSE AND even if turn to true tha DI NOTCHANGE ACCORDING TO ACTUAL STATEI WILL UPLOAD MY PROJECT SO YOU CAN CHECK HWCONFIG FOR RECORD THI MY FIRST PROG WITH B&R [image] […

yes i solved the problem by updating project automation runtime version now i m facing serious problem with isel idm40-ec servo m.drive i can’t find its can open eds and its company inform me they didn’t create the fil e so i creat the file accordinfg to the manual by using can open architect and su…

Hi @mohamed_elbardiny , What do you think? [image] Ciao Valerio

Hi @mohamed_elbardiny , I don’t know why you are trying to change Ethernet and INA parameters. You have X20BC1083 so you need to activate the Powerlink communication and set Operating mode to Powerlink V2: [image] Ciao Valerio

Hi @mohamed_elbardiny , We have some suggestions in the help for the errors 30274 and 32173: [image] [image] Are you changing ETH IP address or Powerlink IP settings in your tasks with AsArCfg library? Could you try to disable all your tasks, transfer and apply a warm restart? Thanks Ciao …

[image] [image] [image] if ther is somthing wrong guidme please

Hello, i think you have the Default Settings active, but can you post the Powerlink Configuration part of Advanced. So we have a possibility to check this values. Thanks. [image] Greetings Michael

Hi, As @valerio.manenti mentionned above: [image] Valerio Manenti: [image] In the powerlink configuration, please let the “Ethernet parameters”, “INA parameters” and “ANSL parameters” to default values. You didn’t need to specify the IP Address and Subnet Mask for Powerlink. For INA para…

Unbelievable, yesterday I was looking for long time NAT settings in the powerlink configuration. Thanks!

@mohamed_elbardiny I tried to configure your settings with my X20EM0612 and AS 6, then I got this error message: [image] Thanks Ciao Valerio

Same issue with AS 4.12: [image] @mohamed_elbardiny I’m sure if you follow our recommendations you’ll fix the issue otherwise you just increase your frustration…not healthy! Ciao Valerio

@valerio.manenti You must first change the SubnetMask in order to prevent that he thinks you use this huge subnet. I have currently no time to try… but i think then the error you show does not occure. It is for sure possible to have IP-Activated simultanious to Powerlink, i even made ANSL Routing…

Power link configuration

Ask Questions B&R Software & Runtime

valerio.manenti (Valerio Manenti) January 14, 2026, 7:03pm 19

yup German is not easy, better the English version:

Ciao
Valerio

Topic		Replies	Views
Issue with POWERLINK Communication After Bus Controller Update Controls & Vision powerlink	7	362	March 21, 2026
Digital input wrong data on Powerlink bus interruption B&R Software & Runtime x20 , powerlink	3	58	March 9, 2026
Powerlink communication between 2 CPUs X20Cp1382 Controls & Vision powerlink	1	332	April 23, 2024
Powerlink Error Mechatronics & Motion acopos-inverter , automation-studio , powerlink	5	232	October 1, 2025
Dynamik configure Powerlink master/slave Controls & Vision automation-runtime , powerlink	6	359	June 4, 2024

Power link configuration

Related topics