Hello I have an X20DS438A module and I want to make an IO link. I took the necessary steps in the configuration settings. How can I control the valve islands through the channel?

Here is an example of how I turn on the first valve coil. PROGRAM _CYCLIC Valve.Out[0].0 := TRUE; END_PROGRAM

Hi, I haven’t done it yet, but it seems to me to be quite extensively documented: B&R Online Help

Hello, I have a Festo valve block with IO Link interface in my project. Here are my settings. You have to adapt the input and output size to your valve block. [image] [image] Regards Stephan

Thanks, I made the settings. well to check my Valves. How can I write a program? In other words, I want to control the 1st line on the 1st channel, or how should I make the assignment to control the 15th valve on the 1st channel?

Providing valve control with the X20DS438A module

Ask Questions Controls & Vision

eem.ferhat (dmr) December 10, 2024, 9:19am 5

thank you dear manager

Topic		Replies	Views
About changed DS438A TO DS4387 Controls & Vision automation-studio , fieldbus	5	186	June 30, 2025
Reading OD2000 sensor value through IO link communication with X20DS438A module Controls & Vision io-link	3	291	November 1, 2024
X20DS838A size of input/output data Controls & Vision x20 , io	2	199	March 11, 2025
3-point valve control Controls & Vision mapp-control	3	243	June 10, 2024
How do multiple X20 PLCs control share common outputs via Ethernet Powerlink? Controls & Vision io-link , powerlink	5	140	March 11, 2026

Providing valve control with the X20DS438A module

Related topics