Hello everyone, I have a X67SM2436 module to controll two stepper motors. For testing purposes only one motor was connected to channel one. Now as everything is working with motor 1, the second motor should be controlled over channel two. In the configuration of the module, under channel 2, real a…

forgot to remove a comment :frowning: m12_axis(); was still a comment

Hello, If you are not sure if your Transfer to the PLC was working correct you can use the OnlineCompare to validate. [image] As you have a working Axis 1 you mostly have to compare all Configuration/Programming Steps against the work you’ve done for Axis 2. The first step i would do, is to ope…

X67SM2436 second channel not working

Ask Questions Mechatronics & Motion

Otto_Laitinen (Otto Laitinen) June 6, 2025, 10:58am 3

forgot to remove a comment
m12_axis(); was still a comment

1 Like

Topic		Replies	Views
Module error follows position, not hardware Controls & Vision plc	3	377	September 26, 2024
X20SM1436 "M" LED not lit Mechatronics & Motion x20 , motors , stepper	3	64	January 7, 2026
Communication problem with X20SM1436-1 for Stepper motor Mechatronics & Motion mapp-motion	3	327	July 15, 2024
Error 29207 and 29216 Mechatronics & Motion stepper	4	2455	May 7, 2024
Add Second Motor to X20SM1436 Mechatronics & Motion motors , automation-studio	14	250	April 16, 2025

X67SM2436 second channel not working

Related topics