[LED] Any one help me how to fix this issue .

I have completed all the troubleshooting steps that were previously advised, but the problem was not resolved. After that, I sent the unit to the repair department for further inspection. They have identified that the main processor is short. I have now arranged a replacement processor. Once it is …

Power off, unplug CFAST, power on. You should see initialization and have the possibility to go to BIOS if you press the respective button. If there is no response from the hardware, very likely it is a hardware issue. The hardware must be sent to the repair department.

Hi @Ahmad_Hassan , have you found solution for your issue? can you update us?

Closed due to inactivity, feel free to update us with your findings.

thanks for update :slight_smile: :slight_smile:

PC 2100 , Multi touch , POWER LED indicator, red

Ask Questions HMI & Visualization

pavel.vavra (Pavel Vavra) January 7, 2026, 5:47am 2

Hello and welcome to the Community,

Check this post.

Topic		Replies	Views
Falla en Automation PC 910 HMI & Visualization automation-runtime , ipc	7	697	April 6, 2024
APC2100 power led/green blinking error? HMI & Visualization	8	1002	April 8, 2024
Blank monitor ppc2100 HMI & Visualization apc-ppc	9	357	April 10, 2025
APC910 Faulty or incomplete BIOS, MTCX or I/O FPGA update HMI & Visualization apc-ppc , bios	1	159	December 16, 2025
APC 910 Fault code HMI & Visualization apc-ppc	3	394	December 20, 2024

PC 2100 , Multi touch , POWER LED indicator, red

Related topics