Hello, We are a small team working on a school project using a 5PPC3100.KBU0-000. Recently, after a power outage, we encountered an issue that required us to reinstall the hypervisor on the CPU. We finally managed to ping the machine again from our computer, but we are still unable to connect to it…

Hello, The following could help you as well - Establishing an Ethernet connection with X20CP1485 . Since you have the hypervisor system, ETH ports are assigned either to GPOS or ArEmb. Which ETH port can you ping? It could be that you are connected to the GPOS ETH port; you can ping it but cannot c…

Thank you for your response. I had connected the cable to the GPOS port. That is why it was not working.

PPC does not connect to Automation Studio

Ask Questions HMI & Visualization

christoph.hilchenbac (Christoph Hilchenbach) May 27, 2026, 1:50pm 2

Hi,

did you read this post ?

How to Connect to a PLC with an Unknown IP Address - Share Info & Ideas / How-To & Wikis - B&R Community

Topic		Replies	Views
Online Settings not found target plc B&R Software & Runtime automation-studio	3	225	May 8, 2024
X20cCP1586 not appearing in the "Target type description" Section of Automation Studios Controls & Vision x20 , automation-studio , plc	10	557	February 12, 2025
Unable to connect to socket on T30 HMI HMI & Visualization vc4 , t-c-panels	4	126	November 25, 2025
PP420 online connection problem with DCHP server assigned to the Ethernet port HMI & Visualization power-panel	2	103	March 22, 2025
Cpu x2p cp1484 does not connect online B&R Software & Runtime automation-studio	31	1558	April 2, 2024

PPC does not connect to Automation Studio

Related topics