Project installation: Partition sizes or number of partitions not corresponding to project requirements

Ask Questions B&R Software & Runtime
, ,
1

I am getting error mentioned in topic but after i followed below steps.

  1. Created USB installation drive on D\:(Normal Sandisk–I did not make it as a bootable).

  2. Then inserted in C80 controller power restart –In boot manager -selected boot options sandisk pendrive––enter

  3. PP-C80-Installation boot window opened –100%

  4. Then other popup window opened —

  5. Then c80 controller screen is not coming.

I don’t know what happened. fyr images are attached here

image

image826×551 24.7 KB

80c1

80c11600×721 51.4 KB

80c2

80c21600×721 74.4 KB

80c3_No_screen

80c3_No_screen1600×721 57.2 KB

Please help me to resolve this issue.

2

Hi @veeresh.suranagi, since there is no answer here, please get in contact with the support team at your local office. Please update us with the solution.

3

Hi all,

After updated the Automation Run time version O4.93 issue resolved.

Thank you all.

4

ok, good hint. Thanks for update :slight_smile: