Replace LCD panel pc 900

Ask Questions HMI & Visualization
1

2025-01-17 at 11.35.46
2025-01-17 at 11.35.461280×960 146 KB

Screenshot 2025-01-17 145727
Screenshot 2025-01-17 145727628×883 170 KB

2025-01-17 at 11.34.53
2025-01-17 at 11.34.53960×1280 113 KB

I want to replace the LCD for the PC 900 panel myself, and I opened it and it turns out the LCD is from the Sharp brand. Can I do this replacement myself without needing to replace my PC 900 panel? because only the LCD was damaged

2

Hi there,

repairs have to go through our regular processes, not involving “user does it himself”. I do not think the community is the right place for this, you can try - but we should not encourage this kind of work.
(Plus simply exchanging a LCD won’t do the trick due to internal calibration data that you can’t access/change, I think)

Best regards
Michael

3

I happen to live in Indonesia, can I make repairs in my own country, maybe there is a partner from B&R to make repairs for this or a seller of the part?

4

I agree with Michael. It’s your hw, so you’re free to try whatever you like. Personally, I would recommend going the regular way through official repair channels to avoid any potential security issues or accidents.

You can contact a partner or the B&R office closest to you, which you can find on our B&R webpage: Locations | B&R Industrial Automation.

Topic is closed by moderators.