Hi there, I am using X20BC00E3 as Profinet coupler to access IO modules from Siemens PLC. While going through manual i found that the firmware version should be 1.6. [image] My current firmware is 1.0 Where will i get file to upgrade firmware. Please suggest. Thanks in advance.

Hi, This firmware file is available on request only from second level support. I recommend reaching out to your local B&R support channel as I’m not sure if anyone is able to share that here.

Asynchronous Configuration,Read/ Write of IO Modules using X20BC00E3

Ask Questions

marcusbnr (Marcus Mangel) Split this topic December 27, 2024, 1:58pm 3

A post was split to a new topic: Configure X20BC00E3 Slots On Fly

Topic		Replies	Views
Siemens and B and R X2X Communication Ask Questions fieldbus	9	751	October 4, 2024
Siemens 1200, X2x B & R Ask Questions fieldbus , io	7	326	May 28, 2024
Configure X20BC00E3 Slots On Fly Ask Questions fieldbus	2	70	January 27, 2025
X20IF10E1-1 communicate with SIEMENS ET 200SP(IM 155-6 PN ST V4.2) Ask Questions fieldbus	11	578	March 28, 2024
PROFINET/IO-Link Gateway from ELCO: Some IOs are not transmitted Ask Questions fieldbus	3	82	November 22, 2024

Asynchronous Configuration,Read/ Write of IO Modules using X20BC00E3

Related topics