In Automation Studio, is it possible to have multiple connections to one device through EtherNet/IP? Help file leads me to think it’s possible but I can’t find how to do it. I navigated every section I could think of and also tried doing it using a Generic Module instead of the EDS file. [B&R EIP …

Hello Sandro, Welcome to the B&R Community! You can have only one (1) Exclusive owner (EthernetIP implicit connection with inputs and outputs) to any EthernetIP adapter. You can have multiple Listen-only connections (Class 3 implicit connections with inputs only) to an EthernetIP adapter. The co…

Multiple EtherNet/IP Connections in Automation Studio

Ask Questions B&R Software & Runtime

marcusbnr (Marcus Mangel) Split this topic November 10, 2025, 4:43pm 4

2 posts were split to a new topic: X20IF10D1-1 EtherNET/IP Master - Multiple Connections

Topic		Replies	Views
X20IF10D1-1 EtherNET/IP Master - Multiple Connections B&R Software & Runtime	3	57	November 11, 2025
X20CP0420 - Using Ethernet and Modbus TCP Controls & Vision plc	1	109	July 1, 2025
Hardware problem: Ethernet node with source address 1 exist more then once HMI & Visualization automation-studio , pvi	2	150	June 18, 2025
Use a PC2200 as a Ethernet/IP scanner Controls & Vision fieldbus	4	177	January 7, 2025
Ethernet/IP Omron PLC Controls & Vision	4	555	June 5, 2024

Multiple EtherNet/IP Connections in Automation Studio

Related topics